What's new

Mod Menu How to Install BO2 GSC Mod Menus [Installing The Tesseract] [STEP-BY-STEP] [Jtag/RGH]

I

ImOx

(^._.^)ノ
Retired
Messages
9,968
Reaction score
2,954
OK, so since a lot of people have been asking how to install GSC in the Support Section and also in threads, I decided to make this thread. And also I think no one has made a tutorial for this (at least not one like this)
So let's get started.

If you have Se7enSins Premium, and are having extreme difficulties with following this tutorial and/or just want a 1 click download which will have everything ready for you, go here:
https://www.se7ensins.com/forums/threads/Meow.1559886/
(Se7enSins Premium is needed for the link)
If not, let's get started with the tutorial:

I'd suggest you to make a back up copy of your normal BO2 in case you fu*k up something really bad. (E.g. I have two BO2s in my RGH, one normal, one for gsc)

Before you post down below "Not working, black screen", I installed a fresh BO2 for my self, and followed this tutorial, downloaded all the files from the links I have in this thread, and everything works as it's supposed to work.
If you get a black screen when you launch the 'default_mp.xex', you failed to follow the tutorial, (most likely failed in the TU18 files part).
If you're 110% sure you followed the tutorial correctly, and still get a black screen, I'd suggest you to get a new fresh BO2, then everything should work perfectly.

When you're transferring files to your Jtag/RGH, replace everything it asks you to replace.

Since you people that are going online and are getting insta-banned, it's because of the challenge response in The Tesseract V2.0. (You should know this because I linked CraigChrist8239's thread and it's obviously recommended to study a little what you're downloading)

So the solution for the insta-banning is removing the challenge response from The Tesseract V2.0 (it's an open source) (or using the older version on The Tesseract (not recommended))
And since most of you people probably wouldn't know how to do that, I did it for you :smile:
So if/when CraigChrist8239 fixes this and possibly adds more stuff just download the new version from his thread: https://www.se7ensins.com/forums/threads/the-tesseract-for-bo2-now-with-gsc-loader.1197876/
And if you didn't already realize/know CraigChrist8239 is the creator of The Tesseract V2.0 so all credit goes to him.

So, download The Tesseract

Transfer the 'Tesseract.dll' to your BO2 directory on your Jtag/RGH.
And now you should have the .dll in your BO2 directory on your Jtag/RGH.

Then you need a modded default_mp.xex.
I'll provide you with one.

Extract the folder and you should have the default_mp.xex you're going to need.

Now transfer the default_mp.xex to your BO2 directory on your Jtag/RGH

OK, good, now you should have The Tesseract installed.


Now moving on to step 2.

Download the files:
Now you should have a folder with files and two folders inside it:
(Ignore my Finnish Operating System)

Highlight all the files and the two folders, and transfer them to your BO2 directory, as shown in the GIF down below.
(Ignore my Finnish Operating System)

Now you should have all the TU18 files transferred.
Moving on to the last step.

Download this:

You should now have a folder like this:
(Ignore my Finnish Operating System, once again)


-------------------------------------------------------------------------------------------------


The 'gametypes' folder is for multiplayer, and the 'gametypes_zm' folder is for zombies.
EDIT:
People have started building menus in different gscs (when I first made this tutorial, no one really did this)
So if you get files named:
'_ambientpackage.gsc'
'_development_dvars.gsc'
'_rank.gsc'
You want to put them in these directories.
(If you get any other files, feel free to ask me where to place them)

So '_ambientpackage.gsc' goes to maps/mp folder. (Just outside gametypes folder)
'_development_dvars.gsc' goes to maps/mp folder. (Just outside gametypes folder)
'_rank.gsc' goes to maps/mp/gametypes folder. (Same place as _clientids.gsc)

There are two mod menus already in the 'raw' folder:
I have used 'Caked Up 1.8' as an example mod menu in the multiplayer folder.
And 'Gr3Zz v4.1' as an example mod menu in the zombies folder.
Note: I didn't make either of these menus!

NOTE: When you extract the 'raw.rar' file, you might get two 'raw' folders, you don't want that. You only want one. (So your path should look like this)

So just transfer the 'raw' folder to your BO2 directory, on your Jtag/RGH.

Use the 'default_mp.xex' to launch the game!
Even if you want to play zombies, launch 'default_mp.xex', don't use 'default.xex'


You should now have gsc fully working! :smile:
Any questions? Post them down below.

I used Xbox Neighborhood in this tutorial, it's not a must, but sure makes this a hell a lot of easier.
(So you can also do all this with USB and XeXMenu)
Don't have Xbox Neighborhood, and want to have it?
Here's a video on how to install it: (video is not made by me)



~Ox
 
Last edited:
S

SqueakR

Enthusiast
Messages
311
Reaction score
48
Great post Ox. this is more than enough to get a nooby nooby up and running
 
K

kingsize513

All Scammers Should Die
Messages
545
Reaction score
109
very good tutorial good job bro. but i have a problem i also get a black screen every time i try to to install any gsc menu. i cant seen to figure it out. the method you posted works like a charm, i helped out a lot of people to get the gsc menu working that way but it never worked for me. any input would be helpfull
 
D

DoX Dio

People Can Only Do So Much
Messages
276
Reaction score
60
Dude which link is it to download the Tesseract.dll i could find it lol
 
D

__Dax

Giraffes
Messages
435
Reaction score
147
You stole my topic man :cry:

lol
 
D

DoX Dio

People Can Only Do So Much
Messages
276
Reaction score
60
Post the Straightt link to the Tesseract.dll file 
ive clicked on the link you put but do i downlaod all the dump file or witch one
 
I

ImOx

(^._.^)ノ
Retired
Messages
9,968
Reaction score
2,954
You stole my topic man :cry:

lol
Did I? lol
Link me yours. 
Post the Straightt link to the Tesseract.dll file 
ive clicked on the link you put but do i downlaod all the dump file or witch one
I'd rather just post the link to CraigChrist8239's thread, because I think he'd appreciate it. (At least I would)

And use your eyes when you look at the thread: :tongue:

 
D

__Dax

Giraffes
Messages
435
Reaction score
147
Did I? lol
Link me yours. 

I'd rather just post the link to CraigChrist8239's thread, because I think he'd appreciate it. (At least I would)

And use your eyes when you look at the thread: :tongue:

as in i was going to post it. xD
 
D

DoX Dio

People Can Only Do So Much
Messages
276
Reaction score
60
Where do i get the RAW,RGH-JTAG,DEV Files? i got the tesseract thanks 
lol nvm i got it lol
 
F

Forman Lancer

Newbie
Messages
2
Reaction score
0
Sorry to be a pain so i take the Tesseract.dll from the folder and transfer it to your BO2 directory on your Jtag/RGH.
but i don't know what BO2 directory on your Jtag/RGH mean's.

PS i am a noob at this type of work and this does run for (ps3)?
 
Last edited:
I

ImOx

(^._.^)ノ
Retired
Messages
9,968
Reaction score
2,954
Sorry to be a pain so i take the Tesseract.dll from the folder and transfer it to your BO2 directory on your Jtag/RGH.
but i don't know what BO2 directory on your Jtag/RGH mean's.

PS i am a noob at this type of work and this does run for (ps3)?
Tbh, I have no idea how to set up gsc for PS3, so sorry I can't help you, this tutorial is for Jtag/RGH. :confused:
 
N

NGS Maniac

Soon to be #1
Messages
151
Reaction score
28
Works like a charm but i hve a problem. I try to load zombies to use the menu grezz menu and when i click start on any map, it goes halfway through, then backs me out the zombies game giving me an error sayin ***3 script error(s). Can i fix this?
 
Top Bottom