How To Flash Any PHAT LiteON Drive WITHOUT Buying ANY Equipment

Discussion in 'Xbox 360 Firmware Modding Tutorials' started by KawaiiLSD, Jun 28, 2014 with 40 replies and 31,569 views.

  1. KawaiiLSD

    KawaiiLSD ×Psychedelic Enthusiast×

    Messages:
    811
    Ratings:
    292
    Hey guys! I dont have much to say but the video below will show you how to flash almost ANY liteon drive I have done this on 3 phats. I'm not sure if it works for slims but hey, give it a go. This method is without buying a probe or anything. :smile:

    Enjoy
    All credit goes too GillDaddy, make sure you drop him a like.
     
    • Like Like x 3
    Last edited: Jun 7, 2017
  2. Andrewh14

    Andrewh14 Enthusiast

    Messages:
    402
    Ratings:
    57
    I think the title meant to say, How to f*** up your xbox in less than 12 minutes!
     
    • Like Like x 1
  3. HuskerHeaven

    HuskerHeaven when I took his glass of champagne... Staff

    Messages:
    8,260
    Ratings:
    3,262
    You can defiantly flash your phat 16d2s without all the bells and whistels of the x360usb pro, but I though that the probe had power running to it, not just ground. I could be wrong though as I only use my x360usb pro, never tried without.
     
  4. Andrewh14

    Andrewh14 Enthusiast

    Messages:
    402
    Ratings:
    57
    Heaven, do you do send in services? Where I could send you my Xbox 360 and you could flash it for me?
     
  5. HuskerHeaven

    HuskerHeaven when I took his glass of champagne... Staff

    Messages:
    8,260
    Ratings:
    3,262
    Yep, I do phats for free. Just pay shipping both ways.
     
  6. Andrewh14

    Andrewh14 Enthusiast

    Messages:
    402
    Ratings:
    57
    Damn really? Where are you located? Like statewise
     
  7. HuskerHeaven

    HuskerHeaven when I took his glass of champagne... Staff

    Messages:
    8,260
    Ratings:
    3,262
    California, bout about to go home for a bit to nebraska. Services may or may not be suspended, depends on if I feel like packing up a few things to go home with.
     
  8. OP
    KawaiiLSD

    KawaiiLSD ×Psychedelic Enthusiast×

    Messages:
    811
    Ratings:
    292
    It actually works, the probe is just grounding point MPX0 and all that does is disable the current block, no need for power. Give it a go its easy you can still use another thing to power the drive makes it easier.
     
  9. Frosty Teh Snowman 2

    Frosty Teh Snowman 2 Enthusiast

    Messages:
    722
    Ratings:
    172
    i would love to do that, if you are going to nebraska and still bringing some tools it will be cheaper for shipping because i live in new york it is half the US closer lol
     
  10. HuskerHeaven

    HuskerHeaven when I took his glass of champagne... Staff

    Messages:
    8,260
    Ratings:
    3,262
    If you use flat rate shipping it's the same. And I did bring some tools home, but forgot my probe at home. :frown:
     
  11. Frosty Teh Snowman 2

    Frosty Teh Snowman 2 Enthusiast

    Messages:
    722
    Ratings:
    172
    oh, ok that is fine. just pm me when you get back and if i can i will pay you a little for your time
     
  12. HuskerHeaven

    HuskerHeaven when I took his glass of champagne... Staff

    Messages:
    8,260
    Ratings:
    3,262
    Will do.
     
  13. yukuku

    yukuku Newbie

    Messages:
    8
    Ratings:
    0
    This Works 100% I Use It My Self All The Time
     
  14. Manasracing

    Manasracing Enthusiast

    Messages:
    71
    Ratings:
    9
    Guys can you mod in games with an flashed xbox 360?
     
  15. SE7ENSINS OG

    SE7ENSINS OG ☆HOSTER☆

    Messages:
    498
    Ratings:
    186
    i have used this video a while back to flash my console its works
     
    • Like Like x 1
  16. Decy

    Decy Getting There

    Messages:
    1,302
    Ratings:
    373
    still have to buy stuff to do it :tongue:
     
  17. SE7ENSINS OG

    SE7ENSINS OG ☆HOSTER☆

    Messages:
    498
    Ratings:
    186
    no you dont i used i a nail for a probe stuck in true a bit of wood raped a wire around it and ground the wire and tuck a on,off switch from remote controlled car and soldered onto phat dvd sata,power cable and it worked so you do not have to buy anything SIMPLE...
     
    • Like Like x 1
  18. Decy

    Decy Getting There

    Messages:
    1,302
    Ratings:
    373
    but what if you dont have a soldering kit :tongue:
     
  19. SE7ENSINS OG

    SE7ENSINS OG ☆HOSTER☆

    Messages:
    498
    Ratings:
    186
    make one
     
    • Like Like x 1
  20. OP
    KawaiiLSD

    KawaiiLSD ×Psychedelic Enthusiast×

    Messages:
    811
    Ratings:
    292
    You dont even need to solder.... Just wrap the wire around the probe and the case.... :tongue:
     

Share This Page