How to flash a Xbox 360 LiteOn DVD Drive with DosFlash v2.0

Discussion in 'Xbox 360 Firmware Modding Tutorials' started by EclipseModz, Oct 29, 2009 with 168 replies and 114,589 views.

  1. SmoothC

    SmoothC Enthusiast

    Messages:
    198
    Ratings:
    23
    haha every time you post something I learn so much useful information! thanks a ton!

    is the dump option just deleting all?
     
  2. OP
    EclipseModz

    EclipseModz VIP VIP Retired

    Messages:
    7,691
    Ratings:
    2,693
    The dump option is to dump the dummy.bin out of your drive. This is what is used to make the modded firmware. Without it you cannot mod your drive. Which is why the new 83850C and 93450C are not moddable because they cannot be dumped.(They can but its not easy)

    After you dump your dummy.bin then that is when you can send the erase command and that will erase the drive.
     
    • Like Like x 1
  3. SmoothC

    SmoothC Enthusiast

    Messages:
    198
    Ratings:
    23
    ohhhh so the dos version dumps the drive in one easy command step.
    the jungle flash does it too, but in a different way? is that correct?
     
  4. OP
    EclipseModz

    EclipseModz VIP VIP Retired

    Messages:
    7,691
    Ratings:
    2,693
    They both do the same thing.

    In dos you type the command
    In Jungleflasher you push a button and do what it tells you to do.
     
    • Like Like x 1
  5. SmoothC

    SmoothC Enthusiast

    Messages:
    198
    Ratings:
    23
  6. OP
    EclipseModz

    EclipseModz VIP VIP Retired

    Messages:
    7,691
    Ratings:
    2,693
    sata card is recommended. a VIA6421 works with all drives. Some onboard chipsets work but for the most part. Most are incompatible.
     
  7. pnGu

    pnGu Newbie

    Messages:
    1
    Ratings:
    0
    Im having som trouble with my drive after using this guide. Got to step 8 where im supposed to restart the program and click yes on the pop-up regarding the mkt vendor intro. I clicked yes and windows started to ***** about requireing a digitally signed driver even though i started the program as an administrator. after a couple of tries i restarted my computer and tried again with no luck. And now my drive is dead, windows cant find it and it doesnt even respond to my ck3 (cant close/open) even tried to put it back into the 360 without any luck... any idea of whats wrong?

    dunno what i did but this time the program found the drive and according to dosflash i've successfully flashed my drive... :smile:
     
  8. OP
    EclipseModz

    EclipseModz VIP VIP Retired

    Messages:
    7,691
    Ratings:
    2,693
    Im confused..

    Did you fix it?

    If you didnt you need to boot into DosFlash to fix what happened.

    If you already fixed it then enjoy your modded drive.
     
  9. DarkBox

    DarkBox Newbie

    Messages:
    3
    Ratings:
    0
    thnxxx for this awesome tut.

    i have a doubt, been reading that we dont need a probe or ck3 if it is already flash, but i dont have any bins or dummy bins.

    can i just press read to extract the key/keys??? and then spoof erase and write?
     
  10. OP
    EclipseModz

    EclipseModz VIP VIP Retired

    Messages:
    7,691
    Ratings:
    2,693
    I never found out how to dump the keys with dosflash on a modded lite-on. Because I never had another lite-on to try and test with. Because the regular read command does not work nor does the lite-on read command.
     
    • Like Like x 1
  11. DarkBox

    DarkBox Newbie

    Messages:
    3
    Ratings:
    0
    thnxx, gonna have to try JF for the 1st time. i am a dosflasher. just never done a lite on
     
  12. OP
    EclipseModz

    EclipseModz VIP VIP Retired

    Messages:
    7,691
    Ratings:
    2,693
    Yea reading a modded lite-on with JF is really easy. You should get it done fast.
     
    • Like Like x 1
  13. DarkBox

    DarkBox Newbie

    Messages:
    3
    Ratings:
    0
    any tut, that you would recomended me
     
  14. OP
    EclipseModz

    EclipseModz VIP VIP Retired

    Messages:
    7,691
    Ratings:
    2,693
    • Like Like x 1
  15. schwartz za

    schwartz za Enthusiast

    Messages:
    41
    Ratings:
    2
    does anyone know when the new Lite-on firmware is coming out?
     
  16. OP
    EclipseModz

    EclipseModz VIP VIP Retired

    Messages:
    7,691
    Ratings:
    2,693
    Almost no way to tell. For now we are stuck with 1.61. Ixtreme LT was delayed until further notice.
     
    • Like Like x 1
  17. tamzeed

    tamzeed Newbie

    Messages:
    2
    Ratings:
    0
    Hello, I have an Xbox 360 go pro 60GB. with manufacture date 2008 Week 50 (December 2008). Its got a Liteon drive 74850C. When I bought it, it was already modded by the store to ixtreme 1.5 and in July 2009, I had a store flash it with 1.6. However, they did not give me any of the keys.

    My question is what is the easiest way I can flash it to 1.61 using the minimum amount of tools.

    Thanks!
     
  18. schwartz za

    schwartz za Enthusiast

    Messages:
    41
    Ratings:
    2
    There is NO 1.61 for Lite-On drives and there wont be one.
     
  19. tamzeed

    tamzeed Newbie

    Messages:
    2
    Ratings:
    0
    really? I thought 1.61 for liteon was released around the 27th or 28th December 2009 (just about 2 weeks ago).
     
  20. schwartz za

    schwartz za Enthusiast

    Messages:
    41
    Ratings:
    2
    sorry man, just saw that now... I was away until yesterday.. was keeping up on news.

    WRT the OQ: You have to get the CK3 kit
     

Share This Page