What's new

Tutorial How to Flash a BenQ Xbox 360 using Jungleflasher

  • Thread starter tOxiC x
  • Start date
  • Views 332,241
tOxiC x

tOxiC x

Enthusiast
Frame In Gold Modder Seasoned Veteran
Messages
657
Reaction score
123
Points
165
Sin$
7
Learn how to flash your Xbox 360 BenQ DVD drive firmware with the newest iXtreme using Jungleflasher. This tutorial will walk you through step by step to make sure you flash your 360 with ease.

How to flash a BenQ Xbox 360 with Jungleflasher

Requirements:

  • Download: tOxiC's FirmPack (This file contains the firmware and the tools you will need)
  • A Via or Nforce chipset
  • A CK3 or Maximus Xtractor *Optional*


FIRST STEP
: Install the drivers for the CK3 (if you are using it) You can find them here:

USB Drivers (XP) - Download
USB Drivers (Vista) - Download

-----------------------------------------------------------------------------------------------
IF YOU ARE NOT USING A CK3 / XTRACTOR SKIP AHEAD TO THE GREEN!
-----------------------------------------------------------------------------------------------

1) Ok, Using a CK3 or Xtractor, hook your xbox up like so.

9ghbfo.jpg


2) Power on your CK3 or Xtracter and then open Jungleflasher.exe.

-----------------------------------------------------------------------------------------------
SKIP THIS SECTION IF YOU ARE USING THE CK3 OR XTRACTOR
-----------------------------------------------------------------------------------------------
1) Hook your SATA cable from your Xbox Disk drive into your VIA Raid. Keep the power cable running from the disk drive into the xbox's motherboard. Hook your xbox up like you normally would when you play.(power supply and video cable)

Note: The video cable does not need to be plugged into a TV, just into the back of the Xbox to prevent an error.

2) Power on your Xbox 360 and open Jungleflasher.exe.
-----------------------------------------------------------------------------------------------
CONTINUE HERE
-----------------------------------------------------------------------------------------------

Ok, now your xbox is hooked up to your PC and you opened JungleFlasher. Navigate to the MTKFlash 32 Tab.

Now under the I/O Port, search for the one that has your drive. It should appear like this:

PBDS VAD6038-64930C
VAD6038 (Or something similiar)

149vxgl.png


Now, follow the picture. Click "BenQ Unlock"

-----------------------------------------------------------------------------------------------
NOTE: If you are on iXtreme 1.5 and upgrading, eject your disk tray and MANUALLY push it back in half way. If it shuts automatically when you power back on, just unplug the drives power cord when it's halfway and replug it back in. Then click Into / Device ID.

-----------------------------------------------------------------------------------------------

Then after you unlock, your "Flash Chip Properties" should be similiar to the one below. It does not have to be exact every computer is different!

15ebrz9.png


Now we can continue and just press "Read".

You should get everything OK, and it will ask you to save, just save to the desktop and it will ask you this message:

2qu12fd.png


Click "Yes".

Now, when you are at the Firmware Tool 32 Tab, check your two DVD keys. The bottom key should match the top one. Click save and save your firmware to the desktop.

xgeidy.png


Now you are already to write your Firmware.

Go back to the MTK Flash 32 Tab.

and all your info should be there, and click "Write".

After you have received this:

2m6lq44.png


Go along and click Outro / ATA Reset. And Done!

Congratulations, you just flashed your BenQ with iXtreme1.51!



Useful Links:
http://www.se7ensins.com/forums/game-rips-and-saves/88333-stealth-check-and-burn-360-games.html
http://www.se7ensins.com/forums/xbo...1-complete-rip-stealth-and-burn-tutorial.html
http://www.se7ensins.com/forums/xbox-360-tutorials/114108-use-abgx.html - Used for copying games without getting caught
http://www.se7ensins.com/forums/xbox-360-tutorials/115497-add-any-gamer-picture-free.html
http://www.se7ensins.com/forums/hardware-customizations/103309-make-rapid-fire-controller.html
 
S

Soapy

Banned
Messages
2,090
Reaction score
344
Points
220
Sin$
0
Re: Flash BenQ with ix1.5 (Jungleflasher)

I have 1 question.

NOTE: When doing the BenQ unlock, eject your disk tray and MANUALLY push it back in half way. If you do not do this you will get a Key Not Found!

How do I manually push it back in half way?
 
F

ForrrestMaster

Guest
Re: Flash BenQ with ix1.5 (Jungleflasher)

Soapy said:
I have 1 question.



How do I manually push it back in half way?


Eject, unplug box. Push tray in halfway, then reboot box.
 
B

Beezy 4 sheezy

Banned
Messages
1,383
Reaction score
68
Points
135
Sin$
0
Re: Flash BenQ with ix1.5 (Jungleflasher)

wow best flashing tut Ive seen so far.
 
C

CaSh

Banned
Messages
911
Reaction score
63
Points
95
Sin$
0
Re: Flash BenQ with ix1.5 (Jungleflasher)

How can I check to make sure I have a Via or Nforce chipset
 
B

Beezy 4 sheezy

Banned
Messages
1,383
Reaction score
68
Points
135
Sin$
0
Re: Flash BenQ with ix1.5 (Jungleflasher)

when ever I plug in my xbox 360 dvd drive windows freezes. So whats going on? how do I fix this?
 
W

whiteforlife

Enthusiast
Messages
459
Reaction score
50
Points
85
Sin$
0
Re: Flash BenQ with ix1.5 (Jungleflasher)

When I try to run jungleflasher.exe before I turn on the Xbox 360 I get this error screen:
wclaj7.jpg


When I turn on my Xbox 360 before I run jungleflasher it freezes windows
 
B

Beezy 4 sheezy

Banned
Messages
1,383
Reaction score
68
Points
135
Sin$
0
Re: Flash BenQ with ix1.5 (Jungleflasher)

first you open portIO32 to install jungleflasher.
 
W

whiteforlife

Enthusiast
Messages
459
Reaction score
50
Points
85
Sin$
0
Re: Flash BenQ with ix1.5 (Jungleflasher)

That fixed that problem but windows still freezes. Now when I try to run jungle flasher I get this new error:
aniwbt.jpg


I have .net framework 2.0 SP2. Is there a newer version I need?
 
B

Beezy 4 sheezy

Banned
Messages
1,383
Reaction score
68
Points
135
Sin$
0
Re: Flash BenQ with ix1.5 (Jungleflasher)

Try downloading 3.5
 
W

whiteforlife

Enthusiast
Messages
459
Reaction score
50
Points
85
Sin$
0
Re: Flash BenQ with ix1.5 (Jungleflasher)

Trying that now
 
Xpargas

Xpargas

Seasoned Member
Mythical Veteran Legendary Veteran Fabled Veteran
Messages
5,264
Reaction score
1,315
Points
640
Sin$
0
Re: Flash BenQ with ix1.5 (Jungleflasher)

Yeah, mine freezes too, and i have 3.5
 
B

Beezy 4 sheezy

Banned
Messages
1,383
Reaction score
68
Points
135
Sin$
0
Re: Flash BenQ with ix1.5 (Jungleflasher)

Ive googled for about an hour and can't find why it freezes.

Do you have to have service pack 3? Cause service pack 3 doesnt work on my computer.
 
W

whiteforlife

Enthusiast
Messages
459
Reaction score
50
Points
85
Sin$
0
Re: Flash BenQ with ix1.5 (Jungleflasher)

Updating to .net Framework 3.5 fixed my framework problem.

Also I have Service Pack 2 and mine freezes. I have also noticed that it will freeze for about 5 minutes and then it will unfreeze for about 5 seconds and then freeze again.
 
B

Beezy 4 sheezy

Banned
Messages
1,383
Reaction score
68
Points
135
Sin$
0
Re: Flash BenQ with ix1.5 (Jungleflasher)

whiteforlife said:
I have Service Pack 2 and mine freezes. I have also noticed that it will freeze for about 5 minutes and then it will unfreeze for about 5 seconds and then freeze again.
same here. I think it is not having service pack 3
 
W

whiteforlife

Enthusiast
Messages
459
Reaction score
50
Points
85
Sin$
0
Re: Flash BenQ with ix1.5 (Jungleflasher)

Ill try installing service pack 3 and then ill tell you how it works. Before I do are there any downsides to SP3?

And I found this youtube video on how to flash with jungleflasher but it didnt really help

[ame]http://www.youtube.com/watch?v=CVgqfjg5_HQ[/ame]
 
B

Beezy 4 sheezy

Banned
Messages
1,383
Reaction score
68
Points
135
Sin$
0
Re: Flash BenQ with ix1.5 (Jungleflasher)

downsides are If you use amd then it will not work.
 
W

whiteforlife

Enthusiast
Messages
459
Reaction score
50
Points
85
Sin$
0
Re: Flash BenQ with ix1.5 (Jungleflasher)

This might sound stupid but I think my SATA card has something with amd and can you send me a link to the SP3 Download. I cant find it on Microsoft.
 
W

whiteforlife

Enthusiast
Messages
459
Reaction score
50
Points
85
Sin$
0
Re: Flash BenQ with ix1.5 (Jungleflasher)

I cant get SP3 to work on my computer. I will try it on another computer if no one else tests it before tomorrow.
 
Top Bottom
Login
Register