E
EclipseModz
VIP
VIP
Retired
Here you can learn how to use DosFlash 1.8 to flash your Xbox 360 Benq drive to play backups.
Requirements
Xbox 360 Benq Drive
USB Drive
VIA Sata Card with Chipset 6421 or a compatible mobo chipset. Which I believe are the nforce chipsets and some intel.
How to open your tray halfway!
http://www.se7ensins.com/forums/fir...09-manually-open-your-xbox-360-dvd-drive.html
Here is the download for everything that will be used in this tutorial.
Includes:
DosFlash
Jungleflasher
HP Boot-disk Maker
Windows 98 Boot files
Benq Ixtreme1.6 Firmware
Alright now we can get started. First thing to do is to make your USB drive able to boot upon startup. So here is a part of Venemous Fire's tutorial showing how the program should look.
Now That your USB drive is Bootable. Place the Windows98 Folder in the root of the drive along with the contents of the DosFlash folder(Do not place the DosFlash folder itself, place only whats inside.)
So your USB drive should look like this now.
Now since you have your USB Drive ready to go its time to move onto the flashing part.
***Have your Benq Tray Halfway Open***
1. First off connect your drive and everything. You can use either a connectivity kit or power with your 360. Here is what mine looks like set up.
2. Now that you have your drive connected its time to boot into DosFlash. Disconnect your harddrive or harddrives if you have more than one and plug in the USB drive. Turn on your computer and it will boot into Windows 98 Dos.
3. On the opening screen you are going to type.
4. Hit enter and you will be shown a list of devices along with #'s on the left to identify them. Mine is #6 as shown in this picture.
*Note that if you are using a 360 to power the drive it may come up with MTKFLASH failed. It will ask if you want to resend the command until it responds. Type y for yes and click enter and power cycle the drive. When it respond it will move on*
5. So see which one is your benq drive, and type in the number for it. So mine is 6 so i will type 6. As shown here.
6. If done right you will be shown this.
7. Now its time to read the firmware from the drive. So type in R for read. Then it will ask what you want to name it. Just name it:
8. If done right you will be shown this.
This is a VERY IMPORTANT FILE! Do not loose it. Store it everywhere. Upload it, put it on another computer, put it in a couple of places, put it on a usb drive. Im sure you get the point now. Just do not loose this file!!
9. Now we are going back into windows to make the firmware with jungleflasher. So open jungleflasher and on the main screen click "Open Source firmware" and select your orig.bin.
10. Now click the Open Target firmware button and select the Benq Ixtreme1.6 firmware.
*Note mine says that the type is Ixtreme1.6 already because i used a flashed 360 to make this tutorial. Yours will say stock if it is not flashed.*
11. Now click the Spoof Source to target button.
12. Then click the Save to harddrive button. It should default as Benq_CFW.bin. Do not change the name leave it alone. When saved put it in the root of your USB Drive and turn off your pc.
13. Now its time to go back into DosFlash. So unplug your harddrive or harddrives again and plug in the usb drive.
14. Type in DosFlash again and type the number of your drive just like you did in step 5. This time instead of Reading we are erasing. So type E for erase and you will end up with this.
Now type DosFlash again and type the number of your drive just like you did in the last step. This time we are going to flash the drive with the firmware. So type W for write. Then type in the firmware name which is:
Then Hit enter and it will start to write. Once its done it should look like this.
Last step. Power down your pc and disconnect and connect the drive to your 360 and test.
You now have a Xbox 360 Benq Drive flashed with Ixtreme1.6.
Hit the thanks bar and nominate if helped.
Requirements
Xbox 360 Benq Drive
USB Drive
VIA Sata Card with Chipset 6421 or a compatible mobo chipset. Which I believe are the nforce chipsets and some intel.
How to open your tray halfway!
http://www.se7ensins.com/forums/fir...09-manually-open-your-xbox-360-dvd-drive.html
Here is the download for everything that will be used in this tutorial.
Includes:
DosFlash
Jungleflasher
HP Boot-disk Maker
Windows 98 Boot files
Benq Ixtreme1.6 Firmware
Code:
http://rapidshare.com/files/289185406/Benq_Tutorial_Download.rar
Venomous Fire said:
Step 1:
Make your USB boot disk using the HP boot program and the windows 98 files
Now That your USB drive is Bootable. Place the Windows98 Folder in the root of the drive along with the contents of the DosFlash folder(Do not place the DosFlash folder itself, place only whats inside.)
So your USB drive should look like this now.
Now since you have your USB Drive ready to go its time to move onto the flashing part.
***Have your Benq Tray Halfway Open***
1. First off connect your drive and everything. You can use either a connectivity kit or power with your 360. Here is what mine looks like set up.
2. Now that you have your drive connected its time to boot into DosFlash. Disconnect your harddrive or harddrives if you have more than one and plug in the USB drive. Turn on your computer and it will boot into Windows 98 Dos.
3. On the opening screen you are going to type.
Code:
DosFlash
4. Hit enter and you will be shown a list of devices along with #'s on the left to identify them. Mine is #6 as shown in this picture.
*Note that if you are using a 360 to power the drive it may come up with MTKFLASH failed. It will ask if you want to resend the command until it responds. Type y for yes and click enter and power cycle the drive. When it respond it will move on*
5. So see which one is your benq drive, and type in the number for it. So mine is 6 so i will type 6. As shown here.
6. If done right you will be shown this.
7. Now its time to read the firmware from the drive. So type in R for read. Then it will ask what you want to name it. Just name it:
Code:
orig.bin
8. If done right you will be shown this.
This is a VERY IMPORTANT FILE! Do not loose it. Store it everywhere. Upload it, put it on another computer, put it in a couple of places, put it on a usb drive. Im sure you get the point now. Just do not loose this file!!
9. Now we are going back into windows to make the firmware with jungleflasher. So open jungleflasher and on the main screen click "Open Source firmware" and select your orig.bin.
10. Now click the Open Target firmware button and select the Benq Ixtreme1.6 firmware.
*Note mine says that the type is Ixtreme1.6 already because i used a flashed 360 to make this tutorial. Yours will say stock if it is not flashed.*
11. Now click the Spoof Source to target button.
12. Then click the Save to harddrive button. It should default as Benq_CFW.bin. Do not change the name leave it alone. When saved put it in the root of your USB Drive and turn off your pc.
13. Now its time to go back into DosFlash. So unplug your harddrive or harddrives again and plug in the usb drive.
14. Type in DosFlash again and type the number of your drive just like you did in step 5. This time instead of Reading we are erasing. So type E for erase and you will end up with this.
Now type DosFlash again and type the number of your drive just like you did in the last step. This time we are going to flash the drive with the firmware. So type W for write. Then type in the firmware name which is:
Code:
Benq_CFW.bin
Then Hit enter and it will start to write. Once its done it should look like this.
Last step. Power down your pc and disconnect and connect the drive to your 360 and test.
You now have a Xbox 360 Benq Drive flashed with Ixtreme1.6.
Hit the thanks bar and nominate if helped.