What's new
  • This section is NOT for Console Modding Support or Queries.
    Please ensure any threads posted here are releases or guides as appropriate.
    If you require support, please post a new thread in Console Modding Support
    Thanks!

Tutorial How to fix STBY_CLK RGH Point

Did this tutorial help you or do you think is is usefull?


  • Total voters
    8
C

Cryptic7s

Enthusiast
Messages
388
Solutions
2
Reaction score
50
Points
105
Sin$
7
Depends what resistors.... you can solder them back on...
My brother seems to have melted them in the soldering Iron :/ lmao. Doesn't matter now I ordered a new falcon so I won't be damaging that point :smile:
 
P

petterros

Newbie
Messages
1
Reaction score
0
Points
35
Sin$
7
I've fixed this point, my console is alive back, but it doesn't want to glitch. Blue light on my matrix glitcher just doesn't show up like before fixing. Any ideas? Could the lenght of wires be important?
 
HuskerHeaven

HuskerHeaven

when I took his glass of champagne...
Retired
Messages
8,249
Reaction score
3,370
Points
1,680
Sin$
7
I've fixed this point, my console is alive back, but it doesn't want to glitch. Blue light on my matrix glitcher just doesn't show up like before fixing. Any ideas? Could the lenght of wires be important?
Take some pics and start your own thread in support. Could be a loose connection elseware as well.
 
I

Inf1n1ty33

Newbie
Messages
20
Reaction score
3
Points
30
Sin$
7
Hi,

do you mean this side of the resistor?



Where should then I solder the orange cable from the coolrunner chip? Just solder it to the bridge?

Thank you very much
 
Octal450

Octal450

Specialist
Specialist
Messages
239
Solutions
6
Reaction score
149
Points
165
Sin$
7
This is a very common repair I do.
You can do something like this:
unknown.png

Connect the resistor to the trace, cover with green solder mask if you have any and cure with UV light.

You can also connect it to the via further down the trace (scrape to expose).

Kind Regards,
Josh
 
Top Bottom
Login
Register