What's new

Solved Help with rgh'ing jasper

  • Thread starter SimpIicity
  • Start date
  • Views 271
S

SimpIicity

Enthusiast
Messages
365
Reaction score
82
Im not sure if this is the right spot for this so if it isnt, staff feel free to move it. Ok so looking to rgh either my jasper or my e slim console and was wondering if you guys could help me out and answer a couple questions for me. Ive never done this before so I wanted to try it out since I have extra consoles. What are some tips you could give me for this ? Could you give me a list of everything I need for it ? What chip is best, what solder is best etc.. If you guys could possibly leave some links to stuff it would help a lot! Thanks to anyone who tries to help, it is appreciated :smile:
 
N

Nokia

[[email protected] ~]$
Lifetime
Messages
2,373
Reaction score
2,794
Im not sure if this is the right spot for this so if it isnt, staff feel free to move it. Ok so looking to rgh either my jasper or my e slim console and was wondering if you guys could help me out and answer a couple questions for me. Ive never done this before so I wanted to try it out since I have extra consoles. What are some tips you could give me for this ? Could you give me a list of everything I need for it ? What chip is best, what solder is best etc.. If you guys could possibly leave some links to stuff it would help a lot! Thanks to anyone who tries to help, it is appreciated :smile:
Just about any chip will do, everyone has there own opinions on chips. I would recommend some 60/40 0.022-0.032 rosin core solder for the job along with a very fine solder tip and some nice flux. The best tip I can give you is to take your time, there is never a need to rush if you are doing your own console. If you take it slow you will be more likely to never run into a problem during the RGH process.
I'll look around for some links for you. :wink:
 
Last edited:
S

SimpIicity

Enthusiast
Messages
365
Reaction score
82
Just about any chip will do, everyone has there own opinions on chips. I would recommend some 60/40 0.022-0.032 rosin core solder for the job along with a very fine solder tip and some nice flux. The best tip I can give you is to take your time, there is never a need to rush if you are doing your own console. If you take it slow you will be more likely to never run into a problem during the RGH process.
I'll look around for some links for you. :wink:

Awesome let me know if you find anything :smile:what chip and type of flux do you recommend?
 
N

Nokia

[[email protected] ~]$
Lifetime
Messages
2,373
Reaction score
2,794
Awesome let me know if you find anything :smile:what chip and type of flux do you recommend?
JRPv2: http://www.amazon.com/gp/product/B00KCT6ZQ2
Soldering Iron: http://www.amazon.com/Delcast-Watt-Precision-Soldering-Iron/dp/B0071N75H0/ (Should be fine for the job.)
Solder: http://www.amazon.com/Qualitek-RA300-Diameter-Solder---TecNec/dp/B00C0NTOFM/ (You can find some way cheaper, this is just to give you an idea of what I'm talking about.)
Flux: Any flux will do, just make sure it's not complete crap. Back when I used to make consoles a lot I liked to use some Amtech 4300, it's pricey but very good if you can find it.
Glitch Chip: http://www.ebay.com/itm/221645679349 (Rev c clone, I'm not saying that's the #1 chip I'm going to recommend, but it's cheap on ebay and will get the job done.)
 
S

SimpIicity

Enthusiast
Messages
365
Reaction score
82
JRPv2: http://www.amazon.com/gp/product/B00KCT6ZQ2
Soldering Iron: http://www.amazon.com/Delcast-Watt-Precision-Soldering-Iron/dp/B0071N75H0/ (Should be fine for the job.)
Solder: http://www.amazon.com/Qualitek-RA300-Diameter-Solder---TecNec/dp/B00C0NTOFM/ (You can find some way cheaper, this is just to give you an idea of what I'm talking about.)
Flux: Any flux will do, just make sure it's not complete crap. Back when I used to make consoles a lot I liked to use some Amtech 4300, it's pricey but very good if you can find it.
Glitch Chip: http://www.ebay.com/itm/221645679349 (Rev c clone, I'm not saying that's the #1 chip I'm going to recommend, but it's cheap on ebay and will get the job done.)

OMG thanks so much man! Youre the first person to actually help me thanks a lot! Do you have skype so we can talk faster?
 
N

Nokia

[[email protected] ~]$
Lifetime
Messages
2,373
Reaction score
2,794
OMG thanks so much man! Youre the first person to actually help me thanks a lot! Do you have skype so we can talk faster?
While I don't use skype, I'm on the Se7enSins Teamspeak very often, the server address is below as well as a download link to teamspeak if you do not have it already.
Server: play.se7ensins.com (Make sure you join with your username as your Se7enSins username.)
Teamspeak: https://www.teamspeak.com/downloads
 
Top Bottom