What's new

Solved Help with Ace V3 install

  • Thread starter Caps Lock
  • Start date
  • Views 3,153
Caps Lock

Caps Lock

Se7ensins is life
Messages
579
Reaction score
77
Points
95
Sin$
0
well I just installed the Ace V3 and I am not sure but it is flashing green, but not booting. I did this order.

  1. Installed
  2. Read nand
  3. porgramed Ace V3 with the files below
271cacc0cd82deafd7f740d67554443e.png


and wrote ECC and that stuff and went for a test boot. The console is not booting but glitching.

Anyways here is my soldering.

65ab1f1af8dfcc4a21e238a5a22af1bc.png


Under the board..

4b4abff185dfb43e5bb45b1a3663d02d.png


Idk never used this chip so yeah any help would be nice <3
 
NETO0214

NETO0214

Banned
Messages
903
Reaction score
185
Points
135
Sin$
0
Solder A Wire From The R1 Point On The Ace.

ace_v2.jpg


Next Solder The other End Of The Wire To Pin 4 On The RF Boards Socket

wire_pin.jpg

Next Scratch A Bit Of The Green Varnish From The RF Board,This Is For The GND Point For The Led.And Solder A Small Bit Of Wire To The Red Pin On The RF Board,This Is For The Positive Point For The Led.
scrach_point.jpg

Now Solder The GND point Of The Led To The GND Point You Scratch Of On The Rf Board.And Solder The Small Wire To The Positive Point Of The Led,And You Should Have Something Like The Image Below.
led_fitted.jpg
 
Caps Lock

Caps Lock

Se7ensins is life
Messages
579
Reaction score
77
Points
95
Sin$
0
Solder A Wire From The R1 Point On The Ace.

ace_v2.jpg


Next Solder The other End Of The Wire To Pin 4 On The RF Boards Socket

wire_pin.jpg

Next Scratch A Bit Of The Green Varnish From The RF Board,This Is For The GND Point For The Led.And Solder A Small Bit Of Wire To The Red Pin On The RF Board,This Is For The Positive Point For The Led.
scrach_point.jpg

Now Solder The GND point Of The Led To The GND Point You Scratch Of On The Rf Board.And Solder The Small Wire To The Positive Point Of The Led,And You Should Have Something Like The Image Below.
led_fitted.jpg
thanks ill do that tmmrw im to tired lmfao
 
Top Bottom
Login
Register