What's new

Solved Help me flash my BenQ, Jungleflasher errors

  • Thread starter Jack Of Trades
  • Start date
  • Views 1,460
J

Jack Of Trades

Newbie
Messages
69
Reaction score
0
Points
45
Sin$
0
As soon as I start JF I get, "No comports were found during enumeration."

I don't know if that is a problem?

I see this when I head over to mtk flash32

It says drive is toshiba lol? I'm looking at my drive right now and its a BenQ, the sticker on it even says so.


jf1.png


I'm using a pcmcia card and have it hooked to 360 drive. Drive is powered by ck3 lite.
 
J

Jack Of Trades

Newbie
Messages
69
Reaction score
0
Points
45
Sin$
0
The other drive is a sony... which I'm pretty sure is my laptop's drive. I'll look in the jf tutorial see if that error is mentioned in there.
 
N

Nickelodeon

Enthusiast
Messages
944
Reaction score
169
Points
125
Sin$
7
As soon as I start JF I get, "No comports were found during enumeration."

I don't know if that is a problem?

I see this when I head over to mtk flash32

It says drive is toshiba lol? I'm looking at my drive right now and its a BenQ, the sticker on it even says so.


jf1.png


I'm using a pcmcia card and have it hooked to 360 drive. Drive is powered by ck3 lite.

First click tick the box ( via ports only ), now there should be more ports to select from.
Your Ben-Q should pup up there.

The comports error is because there are no comports found, meaning you should install the drivers for your CK3 kit.
 
J

Jack Of Trades

Newbie
Messages
69
Reaction score
0
Points
45
Sin$
0
I installed uniATA drivers and it sees a lot more ports now. I ticked via ports only and looked through. However, none of the ports detect my drive.

I don't have a ck3 pro so no drivers are needed. It is just to power dvd drive.
 
N

Nickelodeon

Enthusiast
Messages
944
Reaction score
169
Points
125
Sin$
7
I installed uniATA drivers and it sees a lot more ports now. However, none of the ports detect my drive.

In the mtkflash tab tick the Via only box.
Edit: just notice you haven't got the pro, sorr bout that.
Let me check my old pc if can find something, since it has the Lite too.

In the mtkflash tab tick the Via only box.
Edit: just notice you haven't got the pro, sorr bout that.
Let me check my old pc if can find something, since it has the Lite too.


Could you check device manager to see if the CK3 is showing under comports?
 
J

Jack Of Trades

Newbie
Messages
69
Reaction score
0
Points
45
Sin$
0
Thanks Nickelodeon, I've managed to get it worked out. After doing all that I had to plug in the sata into the left port (master) and make sure it was in good. After that, I refreshed the I/O ports and I went through them until I hit the right one and it recognized my BenQ :smile:

I have jungleflasher irc to thank :smile:
 
Top Bottom
Login
Register