What's new

Solved Help fixing bad flash?

  • Thread starter VB Programmer
  • Start date
  • Views 455
V

VB Programmer

Newbie
Messages
36
Reaction score
0
Points
45
Sin$
0
I have a Xenon JTAG-able that won't turn on.
I had 2 out of 3 identical NANDs and put Xell one it flashed it to the Xbox.
It booted up but nothing showed on the screen. (just like a Xenon 8*** I have, I think its a GPU error)
Since Xell never showed up, I don't have the CPU key yet.
So I re-flashed the NAND, but halfway though the LPT cable came out. So I tried re-flashing again.
Now it won't turn on. I have tried shorting the pins on the NAND so it might be fried now...
I took off the USB ports in the front if that would affect anything.

Would Cygnos360 V2 Rev F help? Is it still supported? Thank you.
 
tim008

tim008

Retired Diet Mod
Retired
Messages
9,292
Reaction score
1,871
Points
690
Sin$
7
I have a Xenon JTAG-able that won't turn on.
I had 2 out of 3 identical NANDs and put Xell one it flashed it to the Xbox.
It booted up but nothing showed on the screen. (just like a Xenon 8*** I have, I think its a GPU error)
Since Xell never showed up, I don't have the CPU key yet.
So I re-flashed the NAND, but halfway though the LPT cable came out. So I tried re-flashing again.
Now it won't turn on. I have tried shorting the pins on the NAND so it might be fried now...
I took off the USB ports in the front if that would affect anything.

Would Cygnos360 V2 Rev F help? Is it still supported? Thank you.
Is it even exploitable?
 
Fire30

Fire30

Seasoned Member
Messages
7,222
Reaction score
2,364
Points
635
Sin$
0
I have a Xenon JTAG-able that won't turn on.
I had 2 out of 3 identical NANDs and put Xell one it flashed it to the Xbox.
It booted up but nothing showed on the screen. (just like a Xenon 8*** I have, I think its a GPU error)
Since Xell never showed up, I don't have the CPU key yet.
So I re-flashed the NAND, but halfway though the LPT cable came out. So I tried re-flashing again.
Now it won't turn on. I have tried shorting the pins on the NAND so it might be fried now...
I took off the USB ports in the front if that would affect anything.

Would Cygnos360 V2 Rev F help? Is it still supported? Thank you.

I would try flashing original again, use nandpro and type in

Code:
C:/nandpro20bnandpro.exe lpt: w-16 originalnandhere.bin
 
V

VB Programmer

Newbie
Messages
36
Reaction score
0
Points
45
Sin$
0
Yes its exploitable, I can't reflash because it won't detect the flash controller. And I don't have access to a computer with LPT anymore but I can go buy an adapter I just need to know what kind.
 
Twisted Impulse

Twisted Impulse

Member
Messages
2,781
Reaction score
613
Points
420
Sin$
7
Short the nand out with a piece of wire across ALL the pins on both sides.

You should really buy a USB flasher, LPT is SO slow + unreliable, and you can pick up a nand-x for about £30 now B)

I'd de-solder the LPT + solder in a usb flasher. The console not booting could be anything, but most of the time all that's needed is the nand shorting :wink:
 
Top Bottom
Login
Register