What's new

Solved HELP Bad Flash!

Andrew74

Andrew74

Enthusiast
Messages
824
Reaction score
219
Hi, I need some help clarifying something.

I flashed a bad kv to my jtag and now I can't boot xell or connect a controller. I tried every possible way to boot xell but no luck. Also theres no x-mas lights.

This is what Oscar told me:

"
Download nandpro and extract your freeboot image from the .rar.

Put nandpro and the freeboot image on the desktop.

Open up CMD and type: cd desktop

Then type: NandPro lpt: -w16 freeboot.bin

Of course replace freeboot.bin with the name of your freeboot image.

Wait 40-60 mins for it to reflash and it should be done.
"

What does he mean when he says this, "Of course replace freeboot.bin with the name of your freeboot image."?

I have this file on my desktop: flashdmp.bin
 
Eaton

Eaton

Contributor
Seasoned Veteran Grizzled Veteran Experienced Veteran
Messages
1,594
Reaction score
421
LOL, that just means to use your file name since it may not be named the same as the one in that example.
 
Andrew74

Andrew74

Enthusiast
Messages
824
Reaction score
219
LOL, that just means to use your file name since it may not be named the same as the one in that example.

I just want to make sure that I'm doing this right b/c this is my first time doing this.

It's the flashdmp.bin file I have to put in cmd ex: NandPro lpt: -w16 flashdmp.bin
 
Laugh

Laugh

Contributor
5th Anniversary Chatty Kathy Jokester
Messages
2,974
Reaction score
515
You have a usb nand flasher/lpt cable?
 
Top Bottom