What's new

Solved Friend Messed Up RGH

  • Thread starter Zolfe
  • Start date
  • Views 664
Z

Zolfe

Enthusiast
Messages
46
Reaction score
3
My friend James was over my house and he didn't know what he was doing and he went into simple 360 nand flasher and I guess he used it off of my USB and it had my Jaspers nand on it and I think he accidentally wrote the nand to my Trinity Dual nand now when I boot the RGH side nothing happens but blinking lights. How do I fix I dont have a backup of the nand but I can connect to Jrunner if needed
 
C

Connor

Hi :3
Retired
Messages
2,146
Reaction score
1,301
My friend James was over my house and he didn't know what he was doing and he went into simple 360 nand flasher and I guess he used it off of my USB and it had my Jaspers nand on it and I think he accidentally wrote the nand to my Trinity Dual nand now when I boot the RGH side nothing happens but blinking lights. How do I fix I dont have a backup of the nand but I can connect to Jrunner if needed
I'm just quite confused on how your "friend" managed to do all that when he had no idea what he was doing in the first place and without you noticing. 
Anyways, very easy fix just check this tutorial
 
Z

Zolfe

Enthusiast
Messages
46
Reaction score
3
I'm just quite confused on how your "friend" managed to do all that when he had no idea what he was doing in the first place and without you noticing.
I was asleep and letting him play on my console 
I'm just quite confused on how your "friend" managed to do all that when he had no idea what he was doing in the first place and without you noticing. 
Anyways, very easy fix just check this tutorial
I dont have a backup because I am stupid
 
C

Connor

Hi :3
Retired
Messages
2,146
Reaction score
1,301
I was asleep and letting him play on my console 

I dont have a backup because I am stupid
You could try finding a Nand that matches yours on Google then from there follow the video?
 
Z

Zolfe

Enthusiast
Messages
46
Reaction score
3
You could try finding a Nand that matches yours on Google then from there follow the video?
Could you help me find a nand? I have demon tool box and Jrunner but JRunner doesnt open it says connection error
 
N

Noobert

RGH/Flashing Support
VIP
Retired
Messages
8,385
Reaction score
4,630
My friend James was over my house and he didn't know what he was doing and he went into simple 360 nand flasher and I guess he used it off of my USB and it had my Jaspers nand on it and I think he accidentally wrote the nand to my Trinity Dual nand now when I boot the RGH side nothing happens but blinking lights. How do I fix I dont have a backup of the nand but I can connect to Jrunner if needed
If you boot into Xell, does it boot Xell?
 
N

Noobert

RGH/Flashing Support
VIP
Retired
Messages
8,385
Reaction score
4,630
Oh then that thing is screwed.

No way you're fixing that without manually soldering the nand and re-writing it.
 
Z

Zolfe

Enthusiast
Messages
46
Reaction score
3
Oh then that thing is screwed.

No way you're fixing that without manually soldering the nand and re-writing it.
What do you mean? What if the seller has the nand the can I fix it? And if not why cant I use a donor?
 
Z

Zolfe

Enthusiast
Messages
46
Reaction score
3
Oh then that thing is screwed.

No way you're fixing that without manually soldering the nand and re-writing it.
And how would I go about doing what you said I can solder
 
N

Noobert

RGH/Flashing Support
VIP
Retired
Messages
8,385
Reaction score
4,630
And how would I go about doing what you said I can solder
You'd need to either buy a Matrix Nand Flasher or a JR Programmer, solder to the nand points, and re-write your nand.
 
Z

Zolfe

Enthusiast
Messages
46
Reaction score
3
You'd need to either buy a Matrix Nand Flasher or a JR Programmer, solder to the nand points, and re-write your nand.
I have a demon chip doesn't the USB on the back do the same thing?
 
N

Noobert

RGH/Flashing Support
VIP
Retired
Messages
8,385
Reaction score
4,630
I have a demon chip doesn't the USB on the back do the same thing?
Yep, you can switch to the Demon Nand, read it back, and create a new nand.
 
Z

Zolfe

Enthusiast
Messages
46
Reaction score
3
Yep, you can switch to the Demon Nand, read it back, and create a new nand.
So I don't need the Matrix or JR and how would I go about doing this sorry I am totally new I have never had a dumb person do this
 
N

Noobert

RGH/Flashing Support
VIP
Retired
Messages
8,385
Reaction score
4,630
So I don't need the Matrix or JR and how would I go about doing this sorry I am totally new I have never had a dumb person do this
Here's a make-shift guide from the top of my head:
  1. Install the Demon Toolbox program on your PC, and plug in the Demon so that it can install the driver.
    If you run into an error while installing the driver, you'll need to disable driver signature enforcement - Which you can find on Google.
  2. Plug the USB Mini connector from the back of the Xbox and the other end to your PC.
  3. Download this version of J-Runner - [Click here to view this link] - Virus Scan
    It will still say Connection Error, but that doesn't matter.
  4. Make sure that the Demon Icon is shown in J-Runner.
    If it isn't, then you didn't install the driver correctly.
  5. In the top bar, click on DemoN > Toggle Nand.
    Make sure it says Switching to DemoN.
    The Demon's Chip on the back of your console will be blue.
  6. Hit on Read Nand, and it'll compare the two reads.
    Make sure it says Nands are the same.
  7. On the top right, make sure Glitch2 is selected, and hit Create ECC*.
    Once created, hit Write ECC.
  8. Once it's done, boot up the Xbox and it should boot directly into Xell.
    Get the CPU Key and type it into the CPU Key box.
  9. Under Dash Version, select 17511, hit Create XeBuild Image, and hit Write Nand.
    MAKE SURE YOU ARE WRITING IT TO THE DEMON
    As long as the light on the chip is blue, it means the Demon's Nand is selected - So you are good.
Once you finish that, you should be good to go.
 
Z

Zolfe

Enthusiast
Messages
46
Reaction score
3
Here's a make-shift guide from the top of my head:
  1. Install the Demon Toolbox program on your PC, and plug in the Demon so that it can install the driver.
    If you run into an error while installing the driver, you'll need to disable driver signature enforcement - Which you can find on Google.
  2. Plug the USB Mini connector from the back of the Xbox and the other end to your PC.
  3. Download this version of J-Runner - [Click here to view this link] - Virus Scan
    It will still say Connection Error, but that doesn't matter.
  4. Make sure that the Demon Icon is shown in J-Runner.
    If it isn't, then you didn't install the driver correctly.
  5. In the top bar, click on DemoN > Toggle Nand.
    Make sure it says Switching to DemoN.
    The Demon's Chip on the back of your console will be blue.
  6. Hit on Read Nand, and it'll compare the two reads.
    Make sure it says Nands are the same.
  7. On the top right, make sure Glitch2 is selected, and hit Create ECC*.
    Once created, hit Write ECC.
  8. Once it's done, boot up the Xbox and it should boot directly into Xell.
    Get the CPU Key and type it into the CPU Key box.
  9. Under Dash Version, select 17511, hit Create XeBuild Image, and hit Write Nand.
    MAKE SURE YOU ARE WRITING IT TO THE DEMON
    As long as the light on the chip is blue, it means the Demon's Nand is selected - So you are good.
Once you finish that, you should be good to go.
How many reads do I do 2? 
How many reads do I do 2?
And do I select glitch 2 before or after the reads? 
How many reads do I do 2? 

And do I select glitch 2 before or after the reads?
And yeah he flashed my Jaspers nand to it so it says it is a jasper what do I do about this? https://gyazo.com/282178d219929b90af20db8747217431
 
Z

Zolfe

Enthusiast
Messages
46
Reaction score
3
Here's a make-shift guide from the top of my head:
  1. Install the Demon Toolbox program on your PC, and plug in the Demon so that it can install the driver.
    If you run into an error while installing the driver, you'll need to disable driver signature enforcement - Which you can find on Google.
  2. Plug the USB Mini connector from the back of the Xbox and the other end to your PC.
  3. Download this version of J-Runner - [Click here to view this link] - Virus Scan
    It will still say Connection Error, but that doesn't matter.
  4. Make sure that the Demon Icon is shown in J-Runner.
    If it isn't, then you didn't install the driver correctly.
  5. In the top bar, click on DemoN > Toggle Nand.
    Make sure it says Switching to DemoN.
    The Demon's Chip on the back of your console will be blue.
  6. Hit on Read Nand, and it'll compare the two reads.
    Make sure it says Nands are the same.
  7. On the top right, make sure Glitch2 is selected, and hit Create ECC*.
    Once created, hit Write ECC.
  8. Once it's done, boot up the Xbox and it should boot directly into Xell.
    Get the CPU Key and type it into the CPU Key box.
  9. Under Dash Version, select 17511, hit Create XeBuild Image, and hit Write Nand.
    MAKE SURE YOU ARE WRITING IT TO THE DEMON
    As long as the light on the chip is blue, it means the Demon's Nand is selected - So you are good.
Once you finish that, you should be good to go.
And yeah he flashed my Jaspers nand to it so it says it is a jasper what do I do about this? https://gyazo.com/282178d219929b90af20db8747217431
 
K

Killjoy666

Getting There
Messages
1,649
Reaction score
234
And yeah he flashed my Jaspers nand to it so it says it is a jasper what do I do about this? https://gyazo.com/282178d219929b90af20db8747217431
Your Reading The RGH Nand, You Must Read Your Retail Nand From The Retail Side.

After You Do That Then Switch To Your RGH Side

Click Create Ecc After That Click Write Ecc

You Will Then Boot Console And Get Cpu Key From Xell (Disconnect USB From Demon Before Powering On)

After You Get Cpu Key And Enter It On Jrunner Click Create Nand Make Sure Dash 17511 Is Selected And RGH2 As Well After Your Create Image Plug In Demon Again And Click Write Nand.
 
Z

Zolfe

Enthusiast
Messages
46
Reaction score
3
Your Reading The RGH Nand, You Must Read Your Retail Nand From The Retail Side.

After You Do That Then Switch To Your RGH Side

Click Create Ecc After That Click Write Ecc

You Will Then Boot Console And Get Cpu Key From Xell (Disconnect USB From Demon Before Powering On)

After You Get Cpu Key And Enter It On Jrunner Click Create Nand Make Sure Dash 17511 Is Selected And RGH2 As Well After Your Create Image Plug In Demon Again And Click Write Nand.
Like this now click create nand? And where is create nand? Do you mean create XEBuild Image? https://gyazo.com/68e0a2ca9b707ed04dba78d3443cd9d7
 
K

Killjoy666

Getting There
Messages
1,649
Reaction score
234
Yes And Make Sure Your On The RGH Nand, Not The Retail Side.
 
Top Bottom