What's new

Tutorial freeboot image problem FIX!

  • Thread starter Legit Help
  • Start date
  • Views 3,018
L

Legit Help

Enthusiast
Messages
783
Reaction score
109
note i am doing this for the 16 megabyte xenon some cmd commands might be different if you have a 256MB or a 512MB nand
and this will fix most problems with freeboot maker
right so if you have xbr(8995) on your jtag and like most people want freeboot(9199)
but every time you want to make a freeboot image you get this

6.jpg



Well if you have a way of reding and writing the nand usb or lpt
Search around for xbr for your motherboard revision

When you have xbr rename the file to xbr.bin a and place in your nand pro folder
Also put the nand you was trying to use with the freboot into the nandpro folder
And rename it to nand.bin

5.jpg


Now open up cmd and type Nandpro nand.bin: -r16 rawkv.bin 1 1 and hit enter
Like so below

4.jpg


Now type NandPro nand.bin: -r16 rawconfig.bin 3de and hit enter like shown below

3.jpg


Now in your nandpro folder there should be the rawkv.bin and raw config.bin

2.jpg


Now what we want to do is inject them into xbr so open up cmd and type

NandPro xbr.bin: -w16 rawkv.bin 1 1

Now do the same for the config so

NandPro xbr.bin: -w16 rawkv.bin

Now open up freeboot maker enter your cpu key and now use the xbr for the image

untitled1.jpg


untitled.jpg


and baaam there you have a freeboot image ready to flash to your jtag
 
U

UxReDxRuM

Enthusiast
Messages
237
Reaction score
2
This works thanks legit helper for the 3 hours u helped me on my jtag!
i haven't forgot bout plus repping u but as u seen my computers weren't in such good shape so I took them in to try to fix them should get back tomorrow.

I have had to use blackberry for net and it sucks lol
 
L

Legit Help

Enthusiast
Messages
783
Reaction score
109
lol ok
any time you need more help just pm me:smile:

lol ok
any time you need help pm me :smile:
 
I

iR x KonVicT

Newbie
Messages
10
Reaction score
3
hey every time i put xbr on my xenon and try to boot it comes up with christmas lights can any1 help.thanks
 
B

blowj

Enthusiast
Messages
61
Reaction score
2
very easy to understand nice job
 
K

KRiMiNAL

Enthusiast
Messages
930
Reaction score
117
Great tut, if only I found this before somebody else created my image for me. <_<
 
I

iG x Warrior

Se7enSins Hoster
Messages
551
Reaction score
130
Nice tut its very noob friendly.
 
H

Hi Im Jesus x

Enthusiast
Messages
505
Reaction score
20
when i do this i still get an error message on freeboot toolbox maker. "Your dump has not been properly extracted" i did everything you told me to. do you know what is wrong???
 
L

Legit Help

Enthusiast
Messages
783
Reaction score
109
what mobo type do you have
 
H

Hi Im Jesus x

Enthusiast
Messages
505
Reaction score
20
i have a zephyr mobo
 
H

Hi Im Jesus x

Enthusiast
Messages
505
Reaction score
20
i still need help if anyone has any idea how to update to 9199 please let me know
 
D

Dr Phil

Enthusiast
Messages
310
Reaction score
89
note i am doing this for the 16 megabyte xenon some cmd commands might be different if you have a 256MB or a 512MB nand
and this will fix most problems with freeboot maker
right so if you have xbr(8995) on your jtag and like most people want freeboot(9199)
but every time you want to make a freeboot image you get this

6.jpg



Well if you have a way of reding and writing the nand usb or lpt
Search around for xbr for your motherboard revision

When you have xbr rename the file to xbr.bin a and place in your nand pro folder
Also put the nand you was trying to use with the freboot into the nandpro folder
And rename it to nand.bin

5.jpg


Now open up cmd and type Nandpro nand.bin: -r16 rawkv.bin 1 1 and hit enter
Like so below

4.jpg


Now type NandPro nand.bin: -r16 rawconfig.bin 3de and hit enter like shown below

3.jpg


Now in your nandpro folder there should be the rawkv.bin and raw config.bin

2.jpg


Now what we want to do is inject them into xbr so open up cmd and type

NandPro xbr.bin: -w16 rawkv.bin 1 1

Now do the same for the config so

NandPro xbr.bin: -w16 rawkv.bin

Now open up freeboot maker enter your cpu key and now use the xbr for the image

untitled1.jpg


untitled.jpg


and baaam there you have a freeboot image ready to flash to your jtag
Wow very helpful thanks :biggrin:
 
M

Mattie4321

Enthusiast
Messages
271
Reaction score
58
can i just say that this is not a complete tutorial!!
There are several mistakes which are not very noticeable and if you follow this tut to the letter it WILL NOT WORK!
it has taken me a day or two to work it out so if you want to correct it pl0x message me.

The concept is there and i have to say that without it i would be stumped!!
+REP!
 
L

Legit Help

Enthusiast
Messages
783
Reaction score
109
can i just say that this is not a complete tutorial!!
There are several mistakes which are not very noticeable and if you follow this tut to the letter it WILL NOT WORK!
it has taken me a day or two to work it out so if you want to correct it pl0x message me.

The concept is there and i have to say that without it i would be stumped!!
+REP!

Please enlighten me and every one else on how this dose not work
 
M

Mattie4321

Enthusiast
Messages
271
Reaction score
58
Please enlighten me and every one else on how this dose not work

Problem 1

Now what we want to do is inject them into xbr so open up cmd and type
NandPro xbr.bin: -w16 rawkv.bin 1 1
Now do the same for the config so
NandPro xbr.bin: -w16 rawkv.bin
Now open up freeboot maker enter your cpu key and now use the xbr for the image


the above is wrong!!
the bellow is correct!!

Now what we want to do is inject them into xbr so open up cmd and type
NandPro xbr.bin: -w16 rawkv.bin 1 1
Now do the same for the config so
NandPro xbr.bin: -w16 rawconfig.bin 3de 2
Now open up freeboot maker enter your cpu key and now use the xbr for the image

Problem 2
Now type NandPro nand.bin: -r16 rawconfig.bin 3de and hit enter like shown below

the above is wrong!!
the bellow is correct!!

Now type NandPro nand.bin: -r16 rawconfig.bin 3de 2 and hit enter like shown below

like i said, they are little but when i followed your tut it did not fix it for me. However, thonks to your tut i did manage to get it fixed so i +rep lol :wink:
 
Top Bottom