What's new

Solved Flashing

  • Thread starter megadethrules123
  • Start date
  • Views 242
M

megadethrules123

Enthusiast
Messages
438
Reaction score
79
Points
85
Sin$
0
I have a Philips-LiteOn 16D4S drive.
Could someone tell me exactly what I need to flash it please?
 
Brother Jordan

Brother Jordan

מספר אחד
VIP
Retired
Sinner Hardened Veteran MotM
Messages
16,615
Reaction score
11,285
Points
1,800
Sin$
0
iMoses, how would one determine the chipset?
Hooking the drive up in jungleflasher and sending the vendor intro to the drive, or by opening the drive case and looking for 03 (MXIC) or 05 (Winbond) as the first 2 numbers of the chip.
Sorry I'm a noob, could you explain that easier?
It's going to be too difficult for you to do. If you haven't done any research of it by yourself, you most likely don't even have the basic flashing parts.
 
-DoC-

-DoC-

Enthusiast
Messages
119
Reaction score
18
Points
70
Sin$
0
You can either look at the chip
mt_win.jpg


or load up Jungleflasher and put the drive into vendor mode.

If you are not sure how to do that you are going to have problems performing a kamikaze hack or installing a switch. Safest bet may be to send it out for flashing or buy an unlocked pcb.
 
Joe Phantom

Joe Phantom

Enthusiast
Messages
32
Reaction score
5
Points
55
Sin$
0
You can either look at the chip
mt_win.jpg


or load up Jungleflasher and put the drive into vendor mode.

If you are not sure how to do that you are going to have problems performing a kamikaze hack or installing a switch. Safest bet may be to send it out for flashing or buy an unlocked pcb.

Didn't tag you or whatever this is (responding perhaps?) so maybe you didn't see my reply above. Nevertheless, as I just said, and I quote "The chips a pain in the a## to spot, but I have a "WINBOND." Can you offer any (further) assistance?" Thanks!
 
-DoC-

-DoC-

Enthusiast
Messages
119
Reaction score
18
Points
70
Sin$
0
The winbond will require a kamikaze hack.



This dude uses a soldering iron. I use a dremel bit.

It's not for everyone :biggrin:

If you'd like more info you can pm me.
 
Top Bottom
Login
Register