tsanummy
Newbie
I'm trying to flash the stock firmware but I can't.
The drive is detected in the bios, the drivers are installed and it gets kinda detected on jungleflasher:
But if I try to sammy unlock or Device ID it just says Status 0x51 and it doesn't work.
I've tried all the tricks, the half-opened tray, the disconnecting the power for 1 second, etc.
I've read I have to use activate.iso but the site is down and there are no mirrors http://www.jungleflasher.net/files/activate.rar
So, any suggestions? What am I doing wrong? is there another way to update the 360 without having to flash stock?
Thanks in advance!
The drive is detected in the bios, the drivers are installed and it gets kinda detected on jungleflasher:
But if I try to sammy unlock or Device ID it just says Status 0x51 and it doesn't work.
I've tried all the tricks, the half-opened tray, the disconnecting the power for 1 second, etc.
I've read I have to use activate.iso but the site is down and there are no mirrors http://www.jungleflasher.net/files/activate.rar
So, any suggestions? What am I doing wrong? is there another way to update the 360 without having to flash stock?
Thanks in advance!