What's new

Solved Flashed Jtag with new freeboot, E79! No xell, LPT or USB. Help?

D

DMW55

Enthusiast
Messages
139
Reaction score
10
Alright so after flashing the new dash I accidently hit keep current kv config or whatever not sure if that's the problem but after i shut down and power cycle i turn on and it now has E79 and will not boot into xell! help please
 
F

Fierce Waffle

Enthusiast
Messages
472
Reaction score
129
Im having the same problem please help.
 
I

ITz UnScRiiPTeD

Enthusiast
Messages
1,005
Reaction score
75
Alright so after flashing the new dash I accidently hit keep current kv config or whatever not sure if that's the problem but after i shut down and power cycle i turn on and it now has E79 and will not boot into xell! help please
Unfortunley theres nothing you can do with out ethier a usb nand flasher, lpt, or xell. Theres no way to reflash the nand without those item. Sorry but your going to have to buy one of those products.
 
B

Brother Jordan

מספר אחד
VIP
Retired
Messages
16,617
Reaction score
11,310
Which motherboard?
 
O

o FKM

Newbie
Messages
12
Reaction score
0
Bad freeboot image. Needs nand reflashing, lpt or usb flasher.
 
B

Brother Jordan

מספר אחד
VIP
Retired
Messages
16,617
Reaction score
11,310
Unfortunley theres nothing you can do with out ethier a usb nand flasher, lpt, or xell. Theres no way to reflash the nand without those item. Sorry but your going to have to buy one of those products.

or have it sent to someone like me
 
D

DMW55

Enthusiast
Messages
139
Reaction score
10
or have it sent to someone like me


Where do you live? I'm in Canada. I have a Nand X USB programmer but I don't have any QSB. I fail at soldering too.
 
B

Brother Jordan

מספר אחד
VIP
Retired
Messages
16,617
Reaction score
11,310
Where do you live? I'm in Canada. I have a Nand X USB programmer but I don't have any QSB. I fail at soldering too.

i live in the U.S. if you have nand-x, try your luck at it by soldering the wires directly to the board. and just try to keep your hand steady while soldering
 
H

HUST13R

Enthusiast
Messages
1,071
Reaction score
91
I've just flashed and all loaded great and run through setup and look through my xbla games but after I turned it off and back on I just get e79. Does it seem a bit strange it all worked and then stopped after reboot.
 
B

Brother Jordan

מספר אחד
VIP
Retired
Messages
16,617
Reaction score
11,310
I've just flashed and all loaded great and run through setup and look through my xbla games but after I turned it off and back on I just get e79. Does it seem a bit strange it all worked and then stopped after reboot.

cuz u have a zephyr/falcon with regular jtag wiring
 
H

HUST13R

Enthusiast
Messages
1,071
Reaction score
91
I have a jasper 512, and I've been using it for the last 6 months ok but put the kinect dash on and appeared to a be working but after a reboot now just comes up with the error
 
L

LooseUnit73

Newbie
Messages
30
Reaction score
1
where can i buy a nand x or usb flasher what ever they are called, i cant find them on ebay.
 
Top Bottom