What's new

Unsolved Falcon v1 console question

  • Thread starter BluesMan67
  • Start date
  • Views 49
B

BluesMan67

Enthusiast
Messages
282
Reaction score
33
Hi guys,just picked up an Xbox 360 (Falcon v1 motherboard inside the casing) that when i powered it on,it booted to 3x red lights,with a 0110 secondary error code.
I have given a full reflow,then fully cleaned and serviced.The console now boots up perfect,every single time.
Now i'm wondering if i should use the 4x RAM cool pads taken from an old busted "Xenon" 360 and place them on the 4x bottom RAM chips on the v1 Falcon board.Too maybe help prevent it red ringing/0110 error again ?
I don't want to pay out on having a FULL reball of the CPU,GPU,RAM chips and Southbridge chip as the expense to pay out for this is going to cost way more than what the console is truly worth nowdays.
Just throwing this out there to read your comments and thoughts really.
 
B

BluesMan67

Enthusiast
Messages
282
Reaction score
33
Admin,please close my thread here.
I managed to get 2x v1 Falcon boards (both had the 0110 error code) working for a short while.
Then both failed again.So i threw them in the bin/trash.
Thanks Admin
 
Top Bottom