What's new

Solved Error 0102 - JTAG - Zyphr - $50 Reward - :D

Anthony1994

Newbie
Messages
18
Reaction score
0
I saw the sticky here that said

"0102 - Error in the "Digital Backbone" (CPU/GPU/RAM), this is usually caused by a cold solder joint between the GPU and the mainboard.
There are two theories to fixing this one deals with the "X" clamps that hold down the chips. The other involves re-Heating the chips. DO NOT attempt either of these if your console is still under warranty. If your console is still under warranty return it to the store where it was purchased or call MS to have it replaced.
[/list]0103 GPU Error this is usually caused by bridged solder points where the GPU connects to the mainboard. see error 0102 for more detailed information"

I bought the xclamp fix the other day and i'm going to try it tomorrow. Will it fix it? If it doesn't how do I reheat the chips? Is it to advanced for me? Can anyone think of any other fixes?

Thanks
 

NSLOpTiiiCzz

Enthusiast
Messages
98
Reaction score
2
too advanced get someone to do it for u trust me u might f*** it up

or buy a new one, i knwo people that can help
 
Top Bottom