What's new
  • Howdy, Guest!

    We have issued a forced password reset on all user accounts, meaning you will not be able to login until this process is complete. Instructions will be displayed when you login with your previous credentials, however if for any reason you do not have access to your associated email address, you will need to contact us at [email protected].

    For more information, please read this Important Announcement

    Thank you for being awesome!

Tools Enable WLAN on FaT32 HDD PS3

  • Thread starter IgFilmsV2
  • Start date
  • Views 175
IgFilmsV2

IgFilmsV2

Enthusiast
Messages
19
Reaction score
4
Points
65
Sin$
7
Bash:
#!/bin/sh
#
# Copyright (C) 2011 glevand ([email protected])
# All rights reserved.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; version 2 of the License.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
#

#
# First, you have to compile your PS3 gelic driver as module.
# Before running this script, unload the driver on Linux,
# run the script and then load the PS3 gelic driver again.
# After that you should be able to use WLAN network device
# on Linux but only on FAT models.
#

PS3HVC_DEV=/dev/ps3hvc
PS3HVC_HVCALL=ps3hvc_hvcall

LPAR_ID=1

RNV_IOS=0x00000000696f7300
RNV_NET=0x6e65740000000000
RNV_EURUS=0x6575727573000000
RNV_LPAR=0x6c70617200000000

echo "old value of repository node 'ios.net.eurus.lpar'"

$PS3HVC_HVCALL $PS3HVC_DEV get_repo_node_val $LPAR_ID $RNV_IOS $RNV_NET $RNV_EURUS $RNV_LPAR

# disable gelic control interface

$PS3HVC_HVCALL $PS3HVC_DEV modify_repo_node_val $LPAR_ID $RNV_IOS $RNV_NET $RNV_EURUS $RNV_LPAR 0 0

echo "new value of repository node 'ios.net.eurus.lpar'"

$PS3HVC_HVCALL $PS3HVC_DEV get_repo_node_val $LPAR_ID $RNV_IOS $RNV_NET $RNV_EURUS $RNV_LPAR
 
Top Bottom
Login
Register