What's new

Solved E79 With USB JTAG

  • Thread starter King John
  • Start date
  • Views 296
K

King John

Newbie
Messages
34
Reaction score
0
http://www.tiaowiki.com/w/How_to_JTAG_XBOX_360_Using_TIAO_USB_SPI_Interface

Okay, so I followed this guide slmost to a pin point, and got the xell image from the usual places on. Heres what happened:

Flashed bad image (some xell f1)
Soldered Diodes
Had some coffee
Tried to boot xbox, wouldn't turn on.
Flashed different image, E79
Flashed different image, E79
Flashed backup, Perfect boot.
Flashed image from usual places, E79
RAEG!
Post on Se7ensins.
 
I

iProScopes

Contributor
Messages
3,184
Reaction score
484
Did you bother to check your JTAG connections?
 
K

King John

Newbie
Messages
34
Reaction score
0
Did you bother to check your JTAG connections?
What do you mean by check? I'm going to assume no, as I haven't heard any other way to check besides just flashing XD
 
I

iProScopes

Contributor
Messages
3,184
Reaction score
484
What do you mean by check? I'm going to assume no, as I haven't heard any other way to check besides just flashing XD

Check the solder connections on your JTAG points.
 
K

King John

Newbie
Messages
34
Reaction score
0
Yeah, its perfect. The only thing I could be suspicious about is the Diodes. Is there anything special I need to do with the image after I get it from xbins?
 
C

Cheez

I Got The Wizard Stick
Retired
Messages
4,721
Reaction score
2,739
Flashing FreeBOOT can be a pain sometimes. Try flashing a XBR3 image, and then using Flash360 to update for FreeBOOT.
 
K

King John

Newbie
Messages
34
Reaction score
0
I can has dir to XBR3? I jus want the right thing.

Went here: /XBOX 360/development/XBReboot/

Update: Downloaded, flashed, E79.
 
Top Bottom