Solved E79 JTAG Xbox 360 Xenon

[deep3r]

I have Xenon JTAG Xbox 360 with 330ohm resistors, I flashed my NAND with memory patches then I flashed a new Keyvault, It worked for about 7-8 hours.

Then while I was playing Real Time Halo my power cut in my house then I turned my JTAG on and E79 and I tried to run Xell and I still got E79, It's an instant E79 that just won't work.

So what can I do?

Is it possible that the resistors blown?

 

[TimeBomB]

most likly the resisters are dead. do you use them for jtag connections? I have the same problem with e79.

 

[zackf89]

resistors are done - use 1N4148-914 switching diodes 100% reliable

 

[deep3r]

It's alright guys I bought the thing Team Xcuter are selling looks pretty sweet and reliable.

 

[Kiwiz]

Hay deep3r,

330ohm is a low resistor any huge surge of power will blow it. Having the power cut will have blown the resistor buddy.

You'll need to go buy another one but before doing so just make sure the motherboard is okay before adding the new resistor.

Good luck

Kiwiz