What's new

Solved E74 1022

  • Thread starter JoshGAMER474
  • Start date
  • Views 1,729
JoshGAMER474

JoshGAMER474

Enthusiast
Messages
397
Reaction score
56
So my Jtag got E74 with Secondary code 1022.
I think its the GPU but I have overheated it and it has worked a couple of times, but now it won't.
I don't think it is the HANA chip, because I have put alot of pressure on it and turned it one, and still E74 w/1022.

Any Ideas?
 
STRATEGIZER

STRATEGIZER

Getting There
Messages
1,744
Reaction score
425
re flow the MOBO with a heat gun & you might be lucky to get a couple of day's to a week out of it ! search for some re flowing tut's on youtube or here !
 
P

PhysX.

Enthusiast
Messages
189
Reaction score
16
not sure about the 1022 but when my older xbox started getting e74 i found that to much pressure on the chip actually makes the xbox not work aswell i did the bolt trick to it as it seemed more secure than penny one , and then when the error came the extent where i had to stand on the xbox when i wanted it t start i tried adding a few CDs under the casing to help press it down and figured out that the xbox turns onto a error screen or just caried on turning on/off maybe try taking some slight pressure off it and i also found that too much ventilation can make it act up as i added a fan to the outer casing above the heat sinks and it made the other factory fans go wild and scream blue murder
 
JoshGAMER474

JoshGAMER474

Enthusiast
Messages
397
Reaction score
56
Actually I just tightened the GPU's heatsink, but only on the end where the Hana chip was closest too. Now it works like a charm.
 

Similar threads

Ix ADZ xI
Replies
4
Views
251
Ix ADZ xI
Ix ADZ xI
Ix ADZ xI
Replies
5
Views
265
Ix ADZ xI
Ix ADZ xI
darkcrash
Replies
11
Views
2K
Icy-Tank
Icy-Tank
S
Replies
11
Views
3K
snipes040
S
aramil248
Replies
39
Views
1K
slingblade1170
slingblade1170
Top Bottom
Login
Register