What's new

Solved Does Xecuter DemoN Phat 16SB work on Trinity console?

  • Thread starter EmanGaming
  • Start date
  • Views 1,496
E

EmanGaming

Enthusiast
Messages
35
Reaction score
1
Points
55
Sin$
0
So, I ordered a Xecuter DemoN Slim a while back (a couple months ago) from ModChipCentral.com, and they sent me the Xecuter DemoN Phat 16SB model, while I have a Trinity.

Does the Phat 16SB DemoN work on a Trinity console?
 
Noobert

Noobert

RGH/Flashing Support
VIP
Retired
Trifecta Scaling the Mountain Mythical Veteran
Messages
8,382
Reaction score
4,645
Points
2,315
Sin$
0
I'm new to this DemoN stuff, but what is the QSB adapter?
Here is a pic of what they sent:
I have a Trinity Demon if you want to trade lol.
I've been looking for a Phat Demon for quite some time.

But to answer your question, you could do a direct wire install, but it definitely won't look as clean of an install.
 
E

EmanGaming

Enthusiast
Messages
35
Reaction score
1
Points
55
Sin$
0
I have a Trinity Demon if you want to trade lol.
I've been looking for a Phat Demon for quite some time.

But to answer your question, you could do a direct wire install, but it definitely won't look as clean of an install.

I’m fine with this DemoN, but is there a tutorial anywhere on how to do a direct wire install?
 
Noobert

Noobert

RGH/Flashing Support
VIP
Retired
Trifecta Scaling the Mountain Mythical Veteran
Messages
8,382
Reaction score
4,645
Points
2,315
Sin$
0
E

EmanGaming

Enthusiast
Messages
35
Reaction score
1
Points
55
Sin$
0
Noobert

Noobert

RGH/Flashing Support
VIP
Retired
Trifecta Scaling the Mountain Mythical Veteran
Messages
8,382
Reaction score
4,645
Points
2,315
Sin$
0
Sorry if I'm being a pain in the butt, but is there a video guide anywhere?
There isn't, as far as I know.

Not many people do a direct wire install with the opposing Demon motherboard.
That's pretty much as good as you're going to find.
 
Noobert

Noobert

RGH/Flashing Support
VIP
Retired
Trifecta Scaling the Mountain Mythical Veteran
Messages
8,382
Reaction score
4,645
Points
2,315
Sin$
0
Dangit, cause the pictures that you linked don't make any sense either...
All you're doing is linking up the Phat Demon points with the Trinity Motherboard points.

It's a little confusing, but the picture I linked has the lines connected to the corresponding points.
 
Noobert

Noobert

RGH/Flashing Support
VIP
Retired
Trifecta Scaling the Mountain Mythical Veteran
Messages
8,382
Reaction score
4,645
Points
2,315
Sin$
0
It's a LITTLE confusing? This isn't even a tutorial.
Welp it turns out I'm really sh*t at Photoshop, and I couldn't find the pictures needed to do what I wanted lol.

So I'll do my best to explain this picture to you:
4ce0e80ff5596bb12c4837a77501229c.png


Looking at your Phat Demon, all the way on the Bottom you have 8 points:
D0, D1, D2 all the way to D7.

So from the Demon to the Trinity Motherboard:
  • D7 -- FT1T8
  • D6 -- FT1T7
  • D5 -- FT1T6
  • D4 -- FT1T5
  • D3 -- FT1T4
  • D2 -- FT1T3
  • D1 -- FT1T2
  • D0 -- FT1T1
Make sure you solder from the pads:
80a1d8d5a925425de840b5780ab150f8.png


Next - Looking at the pads above it:
12338a1502f0d1b1e39e49ba9b88558c.png


You have WP, WE, ALE, CLE, CE, and RE.
Those get soldered to these:
048992d4450b839ccc26923bcda31548.png


You can also see 5v and Ground in that picture above:
b0e571344b875f9ec9e03226c8b91875.png
4ad17d7e63172606747e4fb3976d8f39.png


Lastly, in that group of pads you have RB.

Get gets soldered to the left of the FT1TX points over here:
678d0f32c7c34fc14606628bd61ad092.png


The final 3 points are here:
925506408cdbb285173c236c543fad15.png


Those get soldered over here:
541520d86c1c8fea71479d026fcb620b.png


Ignore the 6, that's for the Trinity Demon.
If you need to see the relation to that on the motherboard, you can see the full image here:
https://team-xecuter.com/demon/slim_install_diagram_final.jpg

If you have any questions, reply back to me.

That's just about as clear as I could possibly make it.
 
E

EmanGaming

Enthusiast
Messages
35
Reaction score
1
Points
55
Sin$
0
Welp it turns out I'm really sh*t at Photoshop, and I couldn't find the pictures needed to do what I wanted lol.

So I'll do my best to explain this picture to you:
4ce0e80ff5596bb12c4837a77501229c.png


Looking at your Phat Demon, all the way on the Bottom you have 8 points:
D0, D1, D2 all the way to D7.

So from the Demon to the Trinity Motherboard:
  • D7 -- FT1T8
  • D6 -- FT1T7
  • D5 -- FT1T6
  • D4 -- FT1T5
  • D3 -- FT1T4
  • D2 -- FT1T3
  • D1 -- FT1T2
  • D0 -- FT1T1
Make sure you solder from the pads:
80a1d8d5a925425de840b5780ab150f8.png


Next - Looking at the pads above it:
12338a1502f0d1b1e39e49ba9b88558c.png


You have WP, WE, ALE, CLE, CE, and RE.
Those get soldered to these:
048992d4450b839ccc26923bcda31548.png


You can also see 5v and Ground in that picture above:
b0e571344b875f9ec9e03226c8b91875.png
4ad17d7e63172606747e4fb3976d8f39.png


Lastly, in that group of pads you have RB.

Get gets soldered to the left of the FT1TX points over here:
678d0f32c7c34fc14606628bd61ad092.png


The final 3 points are here:
925506408cdbb285173c236c543fad15.png


Those get soldered over here:
541520d86c1c8fea71479d026fcb620b.png


Ignore the 6, that's for the Trinity Demon.
If you need to see the relation to that on the motherboard, you can see the full image here:
https://team-xecuter.com/demon/slim_install_diagram_final.jpg

If you have any questions, reply back to me.

That's just about as clear as I could possibly make it.

Thank you, but I have one question. Where do I put the DemoN itself?
 
Noobert

Noobert

RGH/Flashing Support
VIP
Retired
Trifecta Scaling the Mountain Mythical Veteran
Messages
8,382
Reaction score
4,645
Points
2,315
Sin$
0
Thank you, but I have one question. Where do I put the DemoN itself?
It doesn't really matter as far as I know.
I think the person who made that original post on TX's forum put it on the top of the motherboard and had the wires wrapping around to the bottom.
 
Top Bottom
Login
Register