What's new

Solved Disc is not supported?

  • Thread starter MuRkYz
  • Start date
  • Views 23,108
M

MuRkYz

Newbie
Messages
2
Reaction score
0
Points
35
Sup guys,

This is my first time posting here, so please direct/correct me if I'm in the wrong.
I also am relatively new to burning 360 games and I've been browsing the web on tips and tutorials.
I've recently received a flashed 360 slim from a friend overseas in China and he also gave me lots of already burned games like Gears of War 3 etc. (Note I've taken: All games he gave me were burned onto an ANV DVD+R Dual Layer 8.5GB 2.4x disc)
Unfortunately he didn't happen to have Halo Reach, so for the past week or so I've dedicated my time to an attempt to burn it.
I downloaded Reach off the internet and burned using IMGburn to the letter, all seemed well, the disc read on the dashboard (which looks like this btw: http://www.google.com.au/imgres?q=x...&w=600&h=337&ei=s70wT9z-BILNmQWa_cnUBQ&zoom=1)
and showed the picture and info etc. but then it said "Disc not supported" after a couple of seconds, it even installed on the hard drive 100%, but still it says disc not supported.
I am thinking that its the disc thats in the wrong (herp).
But any other form of support would be appreciated.
Thanks.
Murk.
 
Aslan

thehuntsman1360

Enthusiast
Messages
934
Reaction score
177
Points
125
Sup guys,

This is my first time posting here, so please direct/correct me if I'm in the wrong.
I also am relatively new to burning 360 games and I've been browsing the web on tips and tutorials.
I've recently received a flashed 360 slim from a friend overseas in China and he also gave me lots of already burned games like Gears of War 3 etc. (Note I've taken: All games he gave me were burned onto an ANV DVD+R Dual Layer 8.5GB 2.4x disc)
Unfortunately he didn't happen to have Halo Reach, so for the past week or so I've dedicated my time to an attempt to burn it.
I downloaded Reach off the internet and burned using IMGburn to the letter, all seemed well, the disc read on the dashboard (which looks like this btw: http://www.google.com.au/imgres?q=xbox past dashboards&um=1&hl=en&newwindow=1&safe=off&sa=N&biw=1366&bih=705&tbm=isch&tbnid=fQ-1g8w1T5tKIM:&imgrefurl=http://www.engadget.com/2010/09/13/leaked-xbox-360-dashboard-gets-demonstrated-on-video/&docid=lubehHP_z8z1UM&imgurl=http://www.blogcdn.com/www.engadget.com/media/2010/09/xbox-dashboard-09-13-2010.jpg&w=600&h=337&ei=s70wT9z-BILNmQWa_cnUBQ&zoom=1)
and showed the picture and info etc. but then it said "Disc not supported" after a couple of seconds, it even installed on the hard drive 100%, but still it says disc not supported.
I am thinking that its the disc thats in the wrong (herp).
But any other form of support would be appreciated.
Thanks.
Murk.
Did you run the iso through abgx before you burned?
 
M

MuRkYz

Newbie
Messages
2
Reaction score
0
Points
35
I don't know if I have the iXtreme flash, but i did run the reach copy twice through the newest abgx with all green.
abgx repaired the topology entirely, and before that I had to manually fix the ppf because the release had bad CRCs.
 
L

links90

Newbie
Messages
5
Reaction score
0
Points
35
guys i've got almost the same problem but this is how my case goes i took a burned game cd from a friend which was working great on his console but when i installed it on hard-drive & tried to play it, it gave the "This disc is not supported".i had my xbox drive flashed in november (i've no idea what version or firmware is installed o_O ).any suggestions for how to fix it?
 
Aslan

thehuntsman1360

Enthusiast
Messages
934
Reaction score
177
Points
125
guys i've got almost the same problem but this is how my case goes i took a burned game cd from a friend which was working great on his console but when i installed it on hard-drive & tried to play it, it gave the "This disc is not supported".i had my xbox drive flashed in november (i've no idea what version or firmware is installed o_O ).any suggestions for how to fix it?
What game is it?You may need a firmware update?
 
Meloo

Meloo

New York Knicks
Donator Forum Addict Hardened Veteran
Messages
2,613
Reaction score
308
Points
305
What format disc are you using? DVD-R DL? You need that not anything else. Ells Ells i don't think it would need a update because Gears wouldn't work then either, right? So it has to be on 3.0 already. Probably needs a proper topology data might be using the old version, like you said.
 
Aslan

thehuntsman1360

Enthusiast
Messages
934
Reaction score
177
Points
125
its SecOps:The Line & Prototype2 both
They are both xgd3 games.The chances are as stated by Ells is you may need to update your firmware to lt+3.0.You got your last flash in November so you are probably on lt+2.0.The lt3.0 fw was released at Xmas time.
 
L

links90

Newbie
Messages
5
Reaction score
0
Points
35
They are both xgd3 games.The chances are as stated by Ells is you may need to update your firmware to lt+3.0.You got your last flash in November so you are probably on lt+2.0.The lt3.0 fw was released at Xmas time.
any ideas how to update safely to lt3.0 coz i had mine flashed by a game shop & i know nothing of how to install the firmware or upgrade it :frown:
 
Aslan

thehuntsman1360

Enthusiast
Messages
934
Reaction score
177
Points
125
i know sammy drives dont have lt 3.0 only 2.0 but if its an xdg3 doesnt he need an ihas burner?
Yes sammys don't require lt3.0 as they are not ap2.5 capable.I think it's v2.01 for those drives.And yes xgd3 games should be burned with an ihas drive.If he posts his drive model it will paint a better picture.
 
L

links90

Newbie
Messages
5
Reaction score
0
Points
35
What drive do you have?
its a benq (googled to find out) & here's everything i could find in the system settings;
Dashboard: 2.0.14719.0
D:2.014719.0 - K:2.0.14719.0 (BK:2.0.1888.0)
E:0401-E5AA-5BC5-EB53
X:1CF8-44EC-6425-B767
S:A8B7-DB328F4B-CBD1
K:00:00:00:01:00.00.0000.00:000000000000
 
Aslan

thehuntsman1360

Enthusiast
Messages
934
Reaction score
177
Points
125
its a benq (googled to find out) & here's everything i could find in the system settings;
Dashboard: 2.0.14719.0
D:2.014719.0 - K:2.0.14719.0 (BK:2.0.1888.0)
E:0401-E5AA-5BC5-EB53
X:1CF8-44EC-6425-B767
S:A8B7-DB328F4B-CBD1
K:00:00:00:01:00.00.0000.00:000000000000
You need to update your firmware to lt+3.0.
 
M V P

M V P

Enthusiast
Messages
1,144
Reaction score
147
Points
165
Bringing up an old topic but I am having this problem with Dead or Alive 5. I burned it 100% No problems and kProbe looked fine. I put it in my Xbox, the picture of the game comes up on the mini square and the title. When I click play Game, it says This Disc Is Not Supported and puts me back to the dash. The game installed to my HDD 100% no problem so I have no idea what's going on.
 

Similar threads

D
Replies
1
Views
372
YouAintReady4ME
YouAintReady4ME
Vindicates
Replies
20
Views
6K
Brother Jordan
Brother Jordan
O
Replies
4
Views
529
Ouchiesss
O
P
Replies
1
Views
333
BlackShadowGS
BlackShadowGS
Top Bottom
Login
Register