Professional
Admin
Administrator
Hidden Devils
Direct wire install on a trinity, could read and write Nand perfectly with no bad blocks. Issue is the console won't glitch. I've done about 5 other trinities and not had this issue.
Direct wire install on a trinity, could read and write Nand perfectly with no bad blocks. Issue is the console won't glitch. I've done about 5 other trinities and not had this issue.
I did, its just hard to see.If your pictures are current, you didn't set the dip settings.
Trinity Settings are 3 and 4.
I did, its just hard to see.
I've tried swapping to a different wire for each point, also I swapped the cr4 to one of my other spares to see if that was the issue. I'll give an alternative point a shot and if that doesn't work no big loss the console only cost me like $9 au lol. Works fine as a retail.Ah yeah, I can see that.
If it's not booting/glitching, I'd suggest checking the Blue Wire and maybe moving it to an alternate point.
I've tried swapping to a different wire for each point, also I swapped the cr4 to one of my other spares to see if that was the issue. I'll give an alternative point a shot and if that doesn't work no big loss the console only cost me like $9 au lol. Works fine as a retail.
I'll give that a shot when I get out of bed. I'll post with the results after!Try moving it to FT4R2:
The arrow on the left.
Noobert no luck still I really think it is the chip.
What Dips have you tried? How long is cpu_rst and post? Can you get the rater results?Noobert no luck still I really think it is the chip.
Regular trinity cr4 dips, I've tried others as well. I'll see if I can get the rater up for it.What Dips have you tried? How long is cpu_rst and post? Can you get the rater results?
Maybe I got 4 of them lolMaybe you got one of those bad chips from the batch back in February?
Need to see where it's failing on the rater reset's. Post um in the code box's. A good 15 glitch attempts per dip(1-6) one at a time. Don't do two at a time. Leave 7-8 off, and go one by one.Regular trinity cr4 dips, I've tried others as well. I'll see if I can get the rater up for it.
It shows it is glitching but never boots to xell
Maybe I got 4 of them lol
dip1Need to see where it's failing on the rater reset's. Post um in the code box's. A good 15 glitch attempts per dip(1-6) one at a time. Don't do two at a time. Leave 7-8 off, and go one by one.
Overall: 1 / 20
Average: 17.00
Median: 17
Score: 0.00
Cycle 17 - 100.00%
100% within 17 Cycles
Overall: 1 / 20
Average: 17.00
Median: 17
Score: 0.00
Cycle 17 - 100.00%
100% within 17 Cycles
Need the full post readout pasted. I'm off to bed for the night. I'll l9ok it over in the morning.dip1
Code:Overall: 1 / 20 Average: 17.00 Median: 17 Score: 0.00 Cycle 17 - 100.00% 100% within 17 Cycles
dip2
Code:Overall: 1 / 20 Average: 17.00 Median: 17 Score: 0.00 Cycle 17 - 100.00% 100% within 17 Cycles
dip 3
I think dip 3 is the issue
god damn and i thought i was having it ruff, had hard time flashing a drive now watching this i dont feel so dumb XDsame issue with dip 4
Regular trinity cr4 dips, I've tried others as well. I'll see if I can get the rater up for it.
It shows it is glitching but never boots to xell
Maybe I got 4 of them lol
Well thanks for the heads up. Was starting to doubt myself but now I feel a little better after trying 4 and failing.Well, believe it or not, a bunch of people on TX's Forum had the same issue.
I don't know if you know him, but Keil423 had 3 busted CR4s.
Here's a thread about it:
http://team-xecuter.com/forums/threads/151857-Bad-run-of-CR4
Apparently the bad ones fail at 0x25 during booting so... ¯\_(ツ)_/¯
Well thanks for the heads up. Was starting to doubt myself but now I feel a little better after trying 4 and failing.