What's new

Solved cpu_rst pads ripped off

  • Thread starter TheRedishFire
  • Start date
  • Views 1,240
TheRedishFire

TheRedishFire

Enthusiast
Messages
751
Reaction score
27
Points
120
Sin$
7
Ok I am not having a great day first the I tug on the wire and rip the pad off the first cpu_rst point and then I soldered to the alternative ontop of the board it was booting fine then I did this http://m.imgur.com/Q3QIfdP 
Oh sh*t wrong section
 
HuskerHeaven

HuskerHeaven

when I took his glass of champagne...
Retired
Messages
8,249
Reaction score
3,370
Points
1,680
Sin$
7
Ok I am not having a great day first the I tug on the wire and rip the pad off the first cpu_rst point and then I soldered to the alternative ontop of the board it was booting fine then I did this http://m.imgur.com/Q3QIfdP 
Oh sh*t wrong section
That top point doesn't really matter. It's just a resistor to a debug point. Have you tried booting retail after lifting the bottom point though.
 
TheRedishFire

TheRedishFire

Enthusiast
Messages
751
Reaction score
27
Points
120
Sin$
7
Just solder to the bottom trace. Finish with super glue.
Bottom trace I assume you mean on the bottom of the board I cant see the trace. Im not sure if I have the skill to do that is it hard? The alternative points are not working, the three right next to it
 
Top Bottom
Login
Register