G
gordsa
Newbie
Having a little trouble getting a v3/v5 corona to glitch. Ive checked everything i can think of a few times now and ran through a good wide range of SRGH timing files. Nand dumped without any problems and now has the generated ecc file on it with CR4 ticked. My postfix clamp appears to be fine and now im stuck for ideas. My LEDs are telling me Short Short Long but no timing file changes this behaviour.
Any help would be greatly appreciated.
Photos and video below...
https://photos.app.goo.gl/tvYuDxUUj6pjuwwr8
edit: moved the chip to get shorter CD and used a different point for D. Resoldered EF missing resistors several times.
No change.
https://photos.app.goo.gl/7MAHPRHBzuoNCRde8
Any help would be greatly appreciated.
Photos and video below...
https://photos.app.goo.gl/tvYuDxUUj6pjuwwr8
edit: moved the chip to get shorter CD and used a different point for D. Resoldered EF missing resistors several times.
No change.
https://photos.app.goo.gl/7MAHPRHBzuoNCRde8
Last edited: