What's new

Solved Corona V2 repair

C

CATSOFT

Newbie
Messages
16
Reaction score
1
Points
35
Sin$
7
Hello, I've got a Corona V2 for repairs. Originally was open by somebody but i did not see any motherboard modification.
Initial problem, flashing red dot then shutdown. One resistor R4D3 was was big value instead of 0, and it was shutting down because of false overheating.
After bridging the resistor it would power on but solid red after 2 seconds. The error code would be 0020. Then i searched some more and it could be resistors R4E1 and R4E2 that are different values, and i believe they should be the same value, but i don't even know the value, because Microsoft decided not to print values on such small resistors.
Is there any schematic out there for the Corona motherboard, all i could find was for Xenon and Falcon. Or if some good soul could measure the resistors on a Corona V2 motherboard and give me the values, i would appreciate it very much. The resistors are between the XCGPU and the quartz that is near the southbridge chipset.
 
Top Bottom
Login
Register