What's new

Solved Corona 4GB Not starting, crazy noise

S

smailer

Enthusiast
Messages
282
Reaction score
3
Hello,

This is my not first RGH and not first Corona 4GB.

Tools: Home Made SD reader

Video and photo

https://photos.app.goo.gl/LFACsfaBpXxiTIgp2

I have successfully readed Nand and get Key, successfully installed Nand, but Corona won`t start, hard to start from first time (need to unplug and plug power cable) then corona starts, after couple sec makes strange noise.

I have made succesfully today same Corona, but this Corona won`t work.

Have any ideas?

Regards

Thanks for answers
 
K

Killjoy666

Getting There
Messages
1,649
Reaction score
234
Does The Xbox Boot Up At All To Xell Or Dashboard?
 
N

Newsk

Getting There
Messages
2,497
Reaction score
329
Can u make a video of what your saying
 
S

smailer

Enthusiast
Messages
282
Reaction score
3
Not sure what he means there cause I thought he was rghing the console for the first time
I have uploaded new video here:

https://goo.gl/photos/nFAVhuRt5AyD3J8c9

Problem now is:

Sometimes boots fine, sometimes freeze. If unplug cable wont boot, unplug again and works fine, again unplug not working :smile:
where is problem?:smile: 
So Wait After You Updated The Console It Won't Boot?
New uploaded video:

https://goo.gl/photos/nFAVhuRt5AyD3J8c9

Now sometimes boots fine if unplug cable
 
N

Newsk

Getting There
Messages
2,497
Reaction score
329
when it doesnt boot do the fans by chance go crazy? im betting it does. if so either select a different timing file or adjust your cpu rst/post wire length/route.

if you try one of the pro srgh2 files it should stop that behavior. try s2+ 11_2, or s2+ 10_2 from the pro/corona/best timings/pack_2 /xsvf folder. They usually work best for my installs anyway.
 
S

smailer

Enthusiast
Messages
282
Reaction score
3
when it doesnt boot do the fans by chance go crazy? im betting it does. if so either select a different timing file or adjust your cpu rst/post wire length/route.

if you try one of the pro srgh2 files it should stop that behavior. try s2+ 11_2, or s2+ 10_2 from the pro/corona/best timings/pack_2 /xsvf folder. They usually work best for my installs anyway.
If console doesnt boot fans spins normaly (no faster or louder).

I will try your recommendations :smile:
 
N

Newsk

Getting There
Messages
2,497
Reaction score
329
oh ok thought you said crazy noise when doesnt boot

thats usually trinitys that have the fans go nuts anyways.
 
S

smailer

Enthusiast
Messages
282
Reaction score
3
oh ok thought you said crazy noise when doesnt boot

thats usually trinitys that have the fans go nuts anyways.
With 11_2 not working (wont boot)
with 10_2 works but... same sometimes freeze and noise ppsssssssss

https://goo.gl/photos/eTtYKawuoJYwxi1m9

how imposible (xbox turned off) but power liht flashing? bug?

And i always having this problem with CORONA 4gb (Home made NAND reader)

Maybe problem is with my reader?
 
Last edited:
N

Newsk

Getting There
Messages
2,497
Reaction score
329
you mean power light flashes couple times after turn off? that means you need to turn off backround downloads in preferences on xbox . unless you mean it stays on always then idk
if your using home made nand reader and it freezes then unsolder the reader and the ground for crystal and problem may go away. (this happens when i use tx reader with wires going to board but in my case it will freeze on xbox logo}
 
K

Killjoy666

Getting There
Messages
1,649
Reaction score
234
With 11_2 not working (wont boot)
with 10_2 works but... same sometimes freeze and noise ppsssssssss

https://goo.gl/photos/eTtYKawuoJYwxi1m9

how imposible (xbox turned off) but power liht flashing? bug?

And i always having this problem with CORONA 4gb (Home made NAND reader)

Maybe problem is with my reader?
Has Happen To Me On Some Consoles (Always Slim E) While The Console Is Off And That Light Stays On.

Reason Why I Only Do The Slim E With 15432 Muffin Install With Coolrunner Rev D Or Matrix V3.
 
H

HardBoy89

Newbie
Messages
1
Reaction score
0
Did you solved the problem?
I had this bug with 2 corona motherboards.
If the console wont glitch till the second cycle the rst sound/noise stays infinite. The matrix chip blue led stays solid for 5 seconds and after that the light turns off.
Its a matrix with oscillator muffin installation.
Any help would be appreciated.
Thank you.
 
Top Bottom