What's new

Solved Coolrunner Rev C Bridging CAP for Jaspers. Is there a Matrix v1 Equivalent?

T

turdbundy

Enthusiast
Messages
117
Reaction score
6
I know this is a very confusing title.
I've recently switched from using rev Cs to the Matrix Glitcher.
The Muffin install for Coronas / Trinitys have been the bees knees and Rgh 1.2 is working on falcons as it should.
However, On japsers when I'd get a slow boot time for an RGH 1.2 bridging the cap point on the rev C would make it instaboot 9 times outta 10.
Is there a way to accomplish this on the Matrix v1 chip. If so please explain.
Thanks for your time!
 
B

BlueSn00w

RGH/JTAG Seller
Messages
257
Reaction score
38
I forgot how to do it but i know its possible. Bumping so more pplz can see
 
N

Newsk

Contributor
Messages
2,501
Reaction score
329
Tbh I've never had to do that with a matrix on phats especially with 1.2 considering the amount of timing files available .
you can add a capacitor from cpu rst to ground (chipside) for slims, then only ground the top slim pad. (This disables the onboard 220pf cap).

I woukd try both phat jumpers, then one at a time and experiment with adding caps accross (a) and gnd. If your still unhappy with boot times
 
Top Bottom