What's new

Hardware Mods Controller LED Help !

2

2408

Skate Or Die!
Journalist Services Seasoned Veteran
Messages
2,890
Reaction score
1,425
file:///C:/Users/Gabrielle/Desktop/xfghv.jpg

i cannot get the new LED to light up. On the left of the circled space there is a bit of solder and im not sure if that should be there or not. or if it should be white like the other side

PLZ HELP !!!!!!!!!!!!!!

xfghv.jpg
 
Futile

Futile

Contributor
Grizzled Veteran Forum Addict Grammar Nazi
Messages
2,747
Reaction score
719
You need to upload your picture to the internet.

www.imageshack.us
 
Comrade

Comrade

Crusty Old Dude
Retired
Mythical Veteran Contest Sponsor Tutorial Creator
Messages
12,774
Reaction score
6,650
Use the search next time ok?

http://www.se7ensins.com/forums/topic/239503-putting-leds-in-your-controller/
 
2

2408

Skate Or Die!
Journalist Services Seasoned Veteran
Messages
2,890
Reaction score
1,425
I've seen ur tuts like 6 billion times and it's still foreign to me.

+ u did say there's any questions send em
 
Comrade

Comrade

Crusty Old Dude
Retired
Mythical Veteran Contest Sponsor Tutorial Creator
Messages
12,774
Reaction score
6,650
I've seen ur tuts like 6 billion times and it's still foreign to me.

+ u did say there's any questions send em

Alright, im here to answer your question then. What it sounds like is you have the LED backwards. You need to match the + end of the LED to the + end of the pad. Each controller type is different.
 
2Quick4U

2Quick4U

Getting There
Services Seasoned Veteran Grizzled Veteran
Messages
1,139
Reaction score
465
yes pos and neg are backwards turn it arround
they are marked with a very thin green line on the bottom
 
2

2408

Skate Or Die!
Journalist Services Seasoned Veteran
Messages
2,890
Reaction score
1,425
i have tried turning the positioning the LED differently but still no luck. i know i havent fried the board cause the other LED's are still working. do i have to put more solder where the LED was ?
 
F

FezLightning

Enthusiast
Messages
61
Reaction score
6
i have tried turning the positioning the LED differently but still no luck. i know i havent fried the board cause the other LED's are still working. do i have to put more solder where the LED was ?

try a new led. if that doesn't work and you're sure that you've lined it up correctly, you're just not soldering it correctly.
 
Top Bottom