What's new

Solved Cant Solder

  • Thread starter Hunter_Customs
  • Start date
  • Views 194
H

Hunter_Customs

Enthusiast
Messages
180
Reaction score
7
For some reason I havent been able to solder to the 3.3v or ground points on all my consoles anyone know why this is 650F flux and rossion solder
 
N

Noobert

RGH/Flashing Support
VIP
Retired
Messages
8,385
Reaction score
4,623
For some reason I havent been able to solder to the 3.3v or ground points on all my consoles anyone know why this is 650F flux and rossion solder
Keep the iron on the point longer to heat up the point, and slowly push the solder into the iron.

Pretty much the only bit of advice I can give you.
 
H

Hunter_Customs

Enthusiast
Messages
180
Reaction score
7
Keep the iron on the point longer to heat up the point, and slowly push the solder into the iron.

Pretty much the only bit of advice I can give you.
alright thank you Noobert, ill try that and a different tip
 
H

Hunter_Customs

Enthusiast
Messages
180
Reaction score
7
Thank you Noobert I changed the tip and did as you told be this fixed my problem
 
R

rynax

Enthusiast
Messages
178
Reaction score
12
VCC should be easy.
GND is a bit hard if you dont have a fine iron, just solder to the AV/network port edge hook and you'll find how easy that is
 
Top Bottom