What's new
  • Howdy, Guest!

    We have issued a forced password reset on all user accounts, meaning you will not be able to login until this process is complete. Instructions will be displayed when you login with your previous credentials, however if for any reason you do not have access to your associated email address, you will need to contact us at [email protected].

    For more information, please read this Important Announcement

    Thank you for being awesome!

Solved Cant get rgh to boot after ace v3 install

T

Teamsoap

Newbie
Messages
3
Reaction score
0
Points
35
Sin$
0
so i just recently installed a ace v3 chip on my trinity motherboard. I Was able to get through all steps including program the chip itself fairly easy. But I plugged my xbox into the TV to boot xell and when the console powered on, the ring of light just flashed really fast and i get no signal. The chip is flashing green and pulsing. I’ve tried different timing files on it, and still nothing. I’ve tried shortening the wires even more than they already are. I’ve tried fixing the soldering despite it being pretty good(I’ve been soldering for awhile and would like to think im good at it) idk what to do and would appreciate any help in this situation. Thanks y’all
 
Z

Zerker24

Enthusiast
Messages
945
Reaction score
206
Points
170
Sin$
0
What timing file are you using, and how long are you waiting? Also, double check to se if you soldered to the correct locations.

btw, the rapid flashing (green) happens when your disk drive isn't hooked up. The console will still boot fine once it glitches successfully.
 
T

Teamsoap

Newbie
Messages
3
Reaction score
0
Points
35
Sin$
0
What timing file are you using, and how long are you waiting? Also, double check to se if you soldered to the correct locations.

btw, the rapid flashing (green) happens when your disk drive isn't hooked up. The console will still boot fine once it glitches successfully.
I figured that about the light. I have made sure i soldered to the correct place multiple times but it never hurts to check again . And im using timing files I downloaded from theweekendmodder from his video he made on rghing a trinity console. Would it be smart to just start over?
 
Z

Zerker24

Enthusiast
Messages
945
Reaction score
206
Points
170
Sin$
0
I figured that about the light. I have made sure i soldered to the correct place multiple times but it never hurts to check again . And im using timing files I downloaded from theweekendmodder from his video he made on rghing a trinity console. Would it be smart to just start over?
Well, the reason I ask is there are multiple types of timing files that you would use depending on the type of install you do. RGH 2 and S-RGH take different wiring. I am not sure how a muffin install works because I haven't done one. Just make sure you are using the correct tiles for the type of mod you did.

I have followes weekendmodders tuts before. May I ask wich video you're watching? He has a few trinity install vids lol.
 
T

Teamsoap

Newbie
Messages
3
Reaction score
0
Points
35
Sin$
0
Well, the reason I ask is there are multiple types of timing files that you would use depending on the type of install you do. RGH 2 and S-RGH take different wiring. I am not sure how a muffin install works because I haven't done one. Just make sure you are using the correct tiles for the type of mod you did.

I have followes weekendmodders tuts before. May I ask wich video you're watching? He has a few trinity install vids lol.
It was a video on how to rgh slim trinity with cr4 speedup files. And i used the same set of timing files that he used in video before trying different ones.
 
Well, the reason I ask is there are multiple types of timing files that you would use depending on the type of install you do. RGH 2 and S-RGH take different wiring. I am not sure how a muffin install works because I haven't done one. Just make sure you are using the correct tiles for the type of mod you did.

I have followes weekendmodders tuts before. May I ask wich video you're watching? He has a few trinity install vids lol.
In all honesty I should probably restart and make sure i do everything he does cos im not sure where I went wrong
 
Top Bottom
Login
Register