What's new

Solved Can i RGH/JTAG my old xbox 360

J

jaredmcgee

Newbie
Messages
1
Reaction score
0
hello, is my old xbox 360 able to be rgh/jtag the specs are below would u guys mind posting links to all of what i would need either from amazon/ebay if it is able to be rgh or jtag thank you.

its a corona motherboard


Dashboard: 2.0.17511.0

Power Brick: 12V 9,6A

Xbox: 12V 9,6A

MFR date | 2012-9-21
 
Last edited:
N

Noobert

RGH/Flashing Support
VIP
Retired
Messages
8,385
Reaction score
4,629
hello, is my old xbox 360 able to be rgh/jtag the specs are below would u guys mind posting links to all of what i would need either from amazon/ebay if it is able to be rgh or jtag thank you.

its a corona motherboard


Dashboard: 2.0.17511.0

Power Brick: 12V 9,6A

Xbox: 12V 9,6A

MFR date | 2012-9-21

Yes, you can RGH it.

If it has an Internal 4GB Memory, then it's a Corona v4 - if it doesn't, and came with a hard drive, then it's a v3.

I'd recommend using the Ace v3 to RGH it.
 
N

nullrootix

Enthusiast
Messages
86
Reaction score
17
Yes you can rgh a corona but you might need a few tools depending on your type of corona

If its a 16MB nand you will need a jrp(jr programmer v2) to read it
If it is a 4GB you will need a 4gb nand r+w tool
You may also need a post fix as they removed post out on later versions of the corona
The only real way to determine this is to open your 360 and carefully take the heat sink off
Then looks for these traces:
729d0e16b8dc88486930776ae52c3982.png

If its like the 3,4,5 etc you will need a post fix

You'd also need something like a matrix(make sure to get the one with the crystal) or ace v3
 
P

Psyc0Gam3r

Enthusiast
Messages
72
Reaction score
5
Hey just got an old jasper 360 from a mate just woundering if I can rgh or jtag it? It’s a jasper on 13559 dash thanks again
 
L

Lambsky

Enthusiast
Messages
601
Reaction score
237
Where do I find the updates as I assume you can’t just update over live or it will be latest version lol?

The latest version is fine. You will find the updates online, or via Jr runner. And can update via USB stick. The latest is 17526, and every this already available for rgh etc. If you need any help give me a shout.
 
V

Vfrguy96

Newbie
Messages
7
Reaction score
2
Hey everyone I have the same question as him and tried to make a forum but it keeps disappearing but my specs are

Dashboard-2.0.17544
Power supply-12v-10.83a
Mfr date-9-28-10
 
C

CeratedSuperior

No sympathy for the Devil; keep that in mind
Messages
1,158
Reaction score
271
Hey everyone I have the same question as him and tried to make a forum but it keeps disappearing but my specs are

Dashboard-2.0.17544
Power supply-12v-10.83a
Mfr date-9-28-10
That would be a Trinity and can be rgh'd
 
N

Nathanceo

Newbie
Messages
13
Reaction score
0
i am also wondering what my model would be and if it can be rgh'd. also what the best glitch chip or setup for it would be. Thanks
Power supply - 12v 10.83a
mfr date - 09-27-2010
also it came with a kinect because we won it from a cereal box back when the kinect was just released (its pretty fun imp)
 
C

CeratedSuperior

No sympathy for the Devil; keep that in mind
Messages
1,158
Reaction score
271
i am also wondering what my model would be and if it can be rgh'd. also what the best glitch chip or setup for it would be. Thanks
Power supply - 12v 10.83a
mfr date - 09-27-2010
also it came with a kinect because we won it from a cereal box back when the kinect was just released (its pretty fun imp)
That's a Trinity as well. For glitch chips matrix and ace are probably the best choices. I hear a lot of people saying good things about matrix chips but have never used them myself. I've done trinity's with both the ace v3 and v5 and both work great. The v5 has more wires to solder but it performs pretty well and doesn't need to be programmed.
 
Top Bottom