What's new

Solved Bum ace v3 or nah?

A

Audiogamerman

Newbie
Messages
5
Reaction score
0
Why won't this boot xell?

Trinity, j-runner, x360ace v3, jr programmer

I've shown the latest log to keep things clean but know that I have tried several timing files with exact same results, I've reached out to other outlets and been scrutinized about soldering until it was up to "meh, it should work" quality to them. I've checked everything with a dmm and readings are in order. So I'm assuming the ace v3 is bad or I'm missing something in software. Thank you for any help.

Checking Console..
Version: 10
Flash Config: 0x00023010
00023010
Trinity, Jasper 16MB
CB Version: 9231
Trinity
Version: 10
Flash Config: 0x00023010
00023010
Trinity, Jasper 16MB
CB Version: 9231
Trinity
Reading Nand to C:\Users\q6600\Downloads\J-Runner - Copy\output\nanddump1.bin
Reading Nand
Done!
in 3:40 min : sec

Reading Nand to C:\Users\q6600\Downloads\J-Runner - Copy\output\nanddump2.bin
Initializing nanddump1.bin..
Trinity
Glitch2 Selected
Nand Initialization Finished
Reading Nand
Done!
in 3:40 min : sec

Comparing...
Nands are the same
Comparing...
Nands are the same
ECC created
Version: 10
Flash Config: 0x00023010
Writing Nand
image_00000000.ecc
Done!
in 0:18 min : sec

USB XSVF Player Initialized
Xilinx XC2C128-VQ100 ......... [DETECTED]
Erase Succeeded
File: C:\Users\q6600\Desktop\15432 timing files\TRINITY\300 Mhz\timing_60.6\TR_L_0.6_T_60.6.xsvf
Sending Out Packets .........
Success
 
https:// ibb.co/kBeeym
https:// ibb.co/dU63PR
 
N

Noobert

RGH/Flashing Support
VIP
Retired
Messages
8,385
Reaction score
4,624
Why won't this boot xell?

Trinity, j-runner, x360ace v3, jr programmer

I've shown the latest log to keep things clean but know that I have tried several timing files with exact same results, I've reached out to other outlets and been scrutinized about soldering until it was up to "meh, it should work" quality to them. I've checked everything with a dmm and readings are in order. So I'm assuming the ace v3 is bad or I'm missing something in software. Thank you for any help.

Checking Console..
Version: 10
Flash Config: 0x00023010
00023010
Trinity, Jasper 16MB
CB Version: 9231
Trinity
Version: 10
Flash Config: 0x00023010
00023010
Trinity, Jasper 16MB
CB Version: 9231
Trinity
Reading Nand to C:\Users\q6600\Downloads\J-Runner - Copy\output\nanddump1.bin
Reading Nand
Done!
in 3:40 min : sec

Reading Nand to C:\Users\q6600\Downloads\J-Runner - Copy\output\nanddump2.bin
Initializing nanddump1.bin..
Trinity
Glitch2 Selected
Nand Initialization Finished
Reading Nand
Done!
in 3:40 min : sec

Comparing...
Nands are the same
Comparing...
Nands are the same
ECC created
Version: 10
Flash Config: 0x00023010
Writing Nand
image_00000000.ecc
Done!
in 0:18 min : sec

USB XSVF Player Initialized
Xilinx XC2C128-VQ100 ......... [DETECTED]
Erase Succeeded
File: C:\Users\q6600\Desktop\15432 timing files\TRINITY\300 Mhz\timing_60.6\TR_L_0.6_T_60.6.xsvf
Sending Out Packets .........
Success
 
https:// ibb.co/kBeeym
https:// ibb.co/dU63PR
Looks like it, nothing wrong with your soldering or the log.
There was a bad batch of them a few months ago, you might have gotten a left over of those - or just got unlucky otherwise.

Also, super nice soldering and pictures.
 
Q

quest2

Newbie
Messages
16
Reaction score
0
hmm wondering if mines bad or it's just incredibly difficult to rgh a 360. Second xbox still won't boot. I thought 5 wires would be an easy install after doing ps2's but i'm ready to throw my 360 stuff away.
 
K

Killjoy666

Getting There
Messages
1,649
Reaction score
234
Why won't this boot xell?

Trinity, j-runner, x360ace v3, jr programmer

I've shown the latest log to keep things clean but know that I have tried several timing files with exact same results, I've reached out to other outlets and been scrutinized about soldering until it was up to "meh, it should work" quality to them. I've checked everything with a dmm and readings are in order. So I'm assuming the ace v3 is bad or I'm missing something in software. Thank you for any help.

Checking Console..
Version: 10
Flash Config: 0x00023010
00023010
Trinity, Jasper 16MB
CB Version: 9231
Trinity
Version: 10
Flash Config: 0x00023010
00023010
Trinity, Jasper 16MB
CB Version: 9231
Trinity
Reading Nand to C:\Users\q6600\Downloads\J-Runner - Copy\output\nanddump1.bin
Reading Nand
Done!
in 3:40 min : sec

Reading Nand to C:\Users\q6600\Downloads\J-Runner - Copy\output\nanddump2.bin
Initializing nanddump1.bin..
Trinity
Glitch2 Selected
Nand Initialization Finished
Reading Nand
Done!
in 3:40 min : sec

Comparing...
Nands are the same
Comparing...
Nands are the same
ECC created
Version: 10
Flash Config: 0x00023010
Writing Nand
image_00000000.ecc
Done!
in 0:18 min : sec

USB XSVF Player Initialized
Xilinx XC2C128-VQ100 ......... [DETECTED]
Erase Succeeded
File: C:\Users\q6600\Desktop\15432 timing files\TRINITY\300 Mhz\timing_60.6\TR_L_0.6_T_60.6.xsvf
Sending Out Packets .........
Success
 
https:// ibb.co/kBeeym
https:// ibb.co/dU63PR
Try Out Other Timing Files.
 
X

X1337XSNIP3R

Enthusiast
Messages
324
Reaction score
13
Try Out Other Timing Files.
Yeah try different timing files like killjoy said. You could also try a different ace v3. I have gotten a couple of aces that was bad
 
J

JoinTheResistance

Dead to the world, alive for the journey...
Messages
4,670
Reaction score
1,082
I have tried several timing files with exact same results
Can you define "exact same results"?
Also, what is the blinking pattern on the Ace?
 
A

Audiogamerman

Newbie
Messages
5
Reaction score
0
Can you define "exact same results"?
Also, what is the blinking pattern on the Ace?
No matter if I get 3 short or 2 short and a long "blinking"(that changes depending on which set of files I go through and which files in the folders) it will not boot to xell
 
X

X1337XSNIP3R

Enthusiast
Messages
324
Reaction score
13
How long are you letting the console run to try to boot xell?
 
A

Audiogamerman

Newbie
Messages
5
Reaction score
0
How long are you letting the console run to try to boot xell?
Initially I was waiting 4-5 min, then I waited 1 min, 5-6 cycles, 30 cycles, 10 min and 20-an hour. Mind you this is all the different theories I've read about or been told about
 
A

Audiogamerman

Newbie
Messages
5
Reaction score
0
N

Newsk

Contributor
Messages
2,500
Reaction score
329
As mentioned above I would try another ace. If u had a "known working chip" that would be ideal, and answer that question .
Back several months ago when I started receiving bad batches of aces that would barely boot trinitys I would quickly switch the chip/wiring over to project muffin with matrix v3 (or rev d) which only takes a minute to do. Then I at least knew the chips were at fault and not my work.

I eventually found an old ace that I knew was good so I could quickly swap out for diagnosis.
 
A

Audiogamerman

Newbie
Messages
5
Reaction score
0
It seems a bunch of the "srgh" files give me three short blinks, I tried with my own ecc and speed up ecc but all don't boot to xell and they all eventually make the console go red dot
 
F

ForbiddenDarkness

Newbie
Messages
2
Reaction score
0
Is there a way to find out you have a bad X360 Ace V3? like poor quality solder, or by symptoms the board display when it's installed.

Thanks In Advance
 
K

Killjoy666

Getting There
Messages
1,649
Reaction score
234
Is there a way to find out you have a bad X360 Ace V3? like poor quality solder, or by symptoms the board display when it's installed.

Thanks In Advance
That Would Be By Installing A Know Working X360ace V3 To It.
 
F

ForbiddenDarkness

Newbie
Messages
2
Reaction score
0
That Would Be By Installing A Know Working X360ace V3 To It.
I just bought 3 of them, first time using these boards so I don't have a good working one to compare. I just hope these boards aren't from the bad batch, but thanks for your reply Killjoy666.
 
Top Bottom