What's new

Discussion Broken Jtag... will reward with lobby...

  • Thread starter UnflappedAcorns
  • Start date
  • Views 446
Status
Not open for further replies.
U

UnflappedAcorns

Enthusiast
Messages
77
Reaction score
3
So my jtag was working fine, had xbr, xell, etc already installed.

But then i got error e72 and found that one of the solders were loose. If I buy a soldering iron, this should fix it right? This shouldn't be any other hardware issue besides the soldering of the wires right?
 
J

jordpears

Newbie
Messages
1
Reaction score
0
yes that should completly fix it :biggrin: good luck :smile:

Just Re-Soldier and bobs ya uncle your working again :wink:

Jordpears
 
TaklaMakan

TaklaMakan

Enthusiast
Messages
70
Reaction score
8
Yes that would be correct as i know of.
 
SE43

assassin279

Enthusiast
Messages
1,295
Reaction score
83
Yes you can do that :smile:
 
R

Rawrsome

Enthusiast
Messages
619
Reaction score
357
yes that should completly fix it :biggrin: good luck :smile:

Just Re-Soldier and bobs ya uncle your working again :wink:

Jordpears


what this guy said

a friend had the same error and got it working again like this.

hope it helps,
Rawrsome

:smile:
 
Status
Not open for further replies.
Top Bottom