What's new

Unsolved Broken JR-Programmer v2 switch closest to usb port

G

G_ecko

Newbie
Messages
29
Reaction score
4
Just got my jrp and I noticed right out of the packaging the switch was slightly burnt. While setting it up I flipped that switch to the vr1 side and it snapped off... Any alternative way to use it or fix it while I'm waiting for the seller on ebay to reply?
jrp.jpg
 
B

BluesMan67

Enthusiast
Messages
369
Reaction score
44
Is there still a small piece of plastic (from that broken off switch) still inside the metal cover.If so,i would plug it in your pc or laptop,install the drivers,get a small flat head screwdriver and flick that broken switch switch to "JB-BL" so you can flash the update firmware to the programmer.
Then flick that broken switch back out of "BL" mode and see if it will read your 360's nand.
It's worth a try at least.
 
Top Bottom