What's new
  • Howdy, Guest!

    We have issued a forced password reset on all user accounts, meaning you will not be able to login until this process is complete. Instructions will be displayed when you login with your previous credentials, however if for any reason you do not have access to your associated email address, you will need to contact us at [email protected].

    For more information, please read this Important Announcement

    Thank you for being awesome!

P

punkcake21

Newbie
Messages
6
Reaction score
0
Points
20
Sin$
7
i tried to rgh3 my xbox 360 falcon.
i bought a raspberry pi pico and installed pi flasher.
i welded a diode and 22k ohm resistor, then, welded my raspberry to nand pins.
then went to jrunner and did some errors.
at first i lost my original nand beacause i didn't made a backup, but before, i made into xell to check my cpu key.
then i went to google and downloaded a retail nand for the xbox falcon 16mb.
when i flashed it, my xbox wont turn on, and jrunner says "unrecognized flash config"
so i selected my motherboard model manually and i tried flashing a donor nand but when i tried to turn on the xbox nothing happened.
then went back to internet and found that the xbox could be bricked and the only way to unbrick is to erase the current nand the raspberry pi pico cannot erase the nand.
what should i do?
is it worth to buy another glitching tool as matrix or nandx?
any advice?
 
P

punkcake21

Newbie
Messages
6
Reaction score
0
Points
20
Sin$
7
the console gives no signs of life at the moment but jrunner says "unrecognized flash config", and i can manually select the motherboard type.
do i need to flash a falcon donor nand?
if try to read the nand i flashed, jrunner closes itself.
 
gunn1e

gunn1e

Enthusiast
Messages
304
Solutions
4
Reaction score
43
Points
160
Sin$
7
Are you in the UK? Send it to me, I can fix if you're that keen dude.
 
Top Bottom
Login
Register