Solved Benq Flash Crashed In Jungleflasher - Please Help !

[fritte84]

Hello !

I was trying to flash my friend's Benq in JungleFlasher with Ix16 today.

It didnt go well !
Write failed and now JungleFlash/VIA-chip freezes my computer when powering console on in XP.

When booting Dosflash -> power on console -> typing Benq xxxxxx xxxx-> resend command.... -> Yes ->
Power off console - Power on console -> My computer starts to beeeeep and freezes sad.gif

I could really use your help !


This is what happend in Jungle flash:

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~
JungleFlasher 0.1.66 Beta
Session Started Sat Sep 26 23:33:58 2009

This is a 32 bit process running on 4 x 32 bit CPUs
PortIO is installed and running.
Found 4 I/O Ports.
Found 1 Com Ports.
Found 7 windows drives A: C: D: E: F: G: H:
Found 3 CD/DVD drives F: G: H:


Sending Magic Keys to Drive on port 0x0xD000
..........................................
Done!
Sending Vendor Intro
Requesting Device ID
Manufacturer ID: 0xC2
Device ID: 0x11
Flash Name: MXIC(MX25L2005)
Flash Size: 262144 bytes

Getting Status from port 0xD000
Serial flash found with Status 0x73

Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................

Benq Dump file saved to C:\Documents and Settings\Daniel\Skrivbord\BENQ-OFW.bin

Loading MTK_Flash source file
Inquiry string found
Identify string found
DVD key found @ 0xE030 key is 050A57F6812D35F5A64DC1F21A2432D8
Firmware is Benq OSIG: PBDS VAD6038-64930C
Firmware type is: iXtreme v1.4-12x

Auto-Loading target file C:\Documents and Settings\Fritzon\Skrivbord\USB minne\Xbox 360\
JungleFlasher.0.1.66.Beta\JungleFlasher v0.1.66 Beta\firmware\ix16-benq.bin
Target File MD5 hash is: f36c85c5bfba325b283417f8643d7c27
Genuine Benq iXtreme 1.6
Inquiry string found
Identify string found
DVD key found @ 0xE030 key is 77777777777777777777777777777777
Firmware is Benq OSIG: PBDS VAD6038-64930C
Firmware type is: iXtreme v1.60-12x-FINAL-VAD6038

Spoofing Target
DVD Key copied to target
Inquiry strings identical
Identify strings identical
0xFF00 area copied for Benq to Benq
Key database updated

Target f/w saved as: C:\Documents and Settings\Daniel\Skrivbord\POs Benq_CFW.bin

Getting Status from port 0xD000
SPi flash found with Status 0x73

Sending Chip Erase to Port 0xD000
Writing target buffer to flash
Writing Bank 0: ................
Writing Bank 1: ................
Writing Bank 2: ................
Writing Bank 3: ................

Flash Verification Test !
Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................
Write Verify Failed !

 

[EclipseModz]

When booting Dosflash -> power on console -> typing Benq xxxxxx xxxx-> resend command.... -> Yes ->
Power off console - Power on console -> My computer starts to beeeeep and freezes sad.gif

What version of Dosflash are you using? I recommend using 1.7 The files are in this thread and all you have to do is put them on a usb drive and boot from it. Try it and then come back if it fails. You can also use the tutorial but start from Step 4.

http://www.se7ensins.com/forums/xbox-360-tutorials/127410-unlocking-locked-up-lite-drive.html

 

[fritte84]

I never understood how my JungleFlasher was supposed to find my Benq with the drivers to my VIA card uninstalled. But I got a tip to uninstall, and use Intro / Device ID in JF and then all worked out just fine. Thanks for the help anyway !