What's new

Tutorial Beginners guide to Call Of Duty Modding [JTAG/RGH/DEV KIT]

Status
Not open for further replies.
Mice

Mice

Newbie
Messages
27
Reaction score
10
Points
45
Sin$
7
Beginners Guide To Modding Any Call OfDuty!!!




Hey Guys this post is to help all the new Modders/hoster on call of duty. i have tried to include everything you need to know about modding Cod. i have also included a few patches/Dll's and other files related to modding.


THIS FOR BEGINNERS WHO KNOW NOTHING ABOUT MODDING OR USEING THEIR JTAG/RGH/DEV KIT, SO IF YOU ARE NOT NEW TO MODDING THIS THREAD IS NOT FOR YOU.


IF I MISS ANYTHING OUT PLEAS POST BELLOW AND I WILL ADD IT !!!!!




Copying games to HDD:

What you need:
- 1 Jtagged console of any type and enough space on the HDD.
- A copy of the disc you want to copy.
- Xexmenu installed and functioning.


Lets get started.

1. Turn on your jtag normally with no disc inserted.
2. Navigate through the dashboard like so : Games library > Xexmenu and start the application.
3. Navigate yourself into your HDD directory.
4. When in the directory, press "Y" to bring up an options list and select "Create". Enter in a name and this will create a new folder for your game to be copied into.
5. Enter the folder by pressing "A" then once inside press "Y" and select the "Copy Dvd" option from the list.


VERY IMPORTANT FOLLOW THESE NEXT STEPS CAREFULLY.

6. This will eject your disc tray and prompt you with a confirmation screen.
7. Insert the disc and close the tray WITH YOUR HAND not the eject button.
8. Wait 5 - 10 seconds until you can feel the disc start spinning and then click the confirm button. Many people miss this step and it wont work if you do.
9. The game will now start copying. MAKE SURE THAT YOUR CONTROLLER DOES NOT TURN OFF DURING THIS PROCESS. If it does the copying of the ISO will stop and youre going to have to start all over again.
10. When its done copying, you have successfully completed the game installation congrats!





How to Update Your Game:

For this Tut i will use MW2 as a EXAMPLE

When you have got the files needed to update MW2 (Tu8)

Files that come with MW2 Tu8:
- default_mp.xexp
- default.xexp
- dlc1_ui_mp.ff
- dlc2_ui_mp.ff
- TU_10LC20N_0000...0.000000000020A


Download:
MW2 Tu8 Files



1. Once you have download the files, put them on a USB.
2. Plug the USB into your JTAG/RGH/DEV KIT.
3. Go into EXEMenu, copy all files into your MW2 folder ACCEPT TU_10LC20N_0000...0.000000000020A!!!
4. Copy TU_10LC20N_0000...0.000000000020A and place it into your cache folder.


THIS IS THE SAME FOR ALL CODS JUST MAKE SURE YOU PUT THE TU FILE IN THE CACHE FOLDER!!!




How To Setup Dashlaunch:

Grab USB drive.
1. Plug the USB drive into your computer
2. Download the Dah Launch
3. Extract the downloaded file.
4. Put the Dash Launch folder in the root of your USB drive.
5. Put the USB drive in your JTAG or RGH console.
6. Boot up your JTAG or RGH console.
7. Load up XeX Menu.
8. Once XeX Menu is booted up, click RB.
9. If you have more than one USB drive or HDD plugged in, you may have to press right on the D-Pad in order to find your Dash Launch 3.03 folder.
10. Once you find your Dash Launch folder, click on it, then launch the "default.xex."





How To Install SDK neighbourhood:

SDK neighbourhood is a program with allows you to connect your PC to your JTAG/RGH/DEV KIT. doing this allows you to run games and mods without having to go through xexmenu, this also allows you to run tools that allow you to run mods during a game.

ON THE JTAG/RGH/DEV KIT:

1. Download SDK (I CAN NOT PROVIDE A LINK BECAUSE IT IS UNDER COPYRIGHT) you can find SDK early on pirate bay.
2. Download the plugins
- xbdm.xex
- RPC.xex
3. Once you have downloaded the plugins, put them on a usb.
4. Plug the USB in to your JTAG/RGH/DEV KIT,
5. Copy both files onto your HDD.
6. Then go to dash launch.
7. Go to plugins, go down to plugin 1 and press A and select HDD, then select xbdm.xex. Then go to plugin 2 and select RPC.xex.
8. After you have selected the plugins press RB then go down to HDD and press X (THIS WILL SAVE THE PLUGINS)


ON THE PC:

1. Install SDK neighbourhood.
2. After you have installed SDK select XBOX 360 neighbourhood (which will be on your desktop)
3. when it open select find XBOX.
4. it will ask you for the IP of your console. (THIS CAN BE FOUND ON XEXMENU BY PRESSING RB WHEN XEXMENU IS FIRST OPENED)
5. After you have found your JTAG/RGH you are ready to go.





How To Get Your JTAG/RGH/DEV KIT To Go ONLINE:

I have seen a lot of post asking how to get online so this is a nice and easy tut on how to do so.


Things you need to know:
- The only public server is EXBLS (XBLS IS OVER AND DOESNT EXSIST ANYMORE)
- IT is not free


I DO NOT SELL EXBLS TIME SO DONT ASK ME

How to Install:
1. You have to buy time off the EXBLS owners, they will send you the files.
2. once you have the files
- launch.ini
- xbdm.xex
- XBLStealth.xex
3. place all files on the root of your HDD
4. Put XBLStealth as the first plugin , then put xbdm.xex/RPC.xex as 2, 3 as show in the above Tut on SDK.
5. now restart your console and then you are good to go.





How to Change a KV:

DOWNLOADS:


Flash 360: http://www.mediafire.com/download/mhtikf...1.0.rar360

Flash Tool: http://www.mediafire.com/download/m6zeb9...ash360.xex


After you are done downloading the programs needed, place them on the root of your USB ( The first page that pops up when you open it)

Now just follow these steps and let me know if anybody has any issues

1- Place your USB, with flash360 and 360flashtool on it, into your JTAG console
2- Power on your console and navigate to xex menu and open it
3- use the Right Bumber on you controller to navigate to the USB tab
4- Click on flash360 and it should direct you to a blue screen with small words on it
5- click "x" to write the original NAND of your xbox to your USb. (follow the rest of the instructions for it to begin)
6- Remove your USB from your xbox and place it into your computer
7- The Original NAND of your JTAG should have saved as flashdmp.bin


1- Double click on 360 Flash tool
2- Browse for the flashdmp.bin file on USB and open it with 360 flash tool
3- click the keys tab a the top of the screen and make sure the two top boxes are check marked
4- Next, write in the CPU key of your JTAG where it says "CPU" ( To get this code power off your JTAG, then hit the eject button on the disc tray. After the screen has stopped moving your CPU key should be there)
5- After you have typed in your CPU key click "ok" and everything should dissapear.
6- Open the flashdmp.bin file with 360 flash tool again and all of your Console information should be listed below
7- Take note of your DVD key and DVD drive type because you will need it later.


1- Next click the "import" button and select "key Vault"
2- Browse for the KV_dec.bin file you should have saved on your desktop (thats the new unbanned KV)
3- Save that as "edit01.bin"
4- Open edit01.bin in 360 flash tool
5- Then click the patch button on the bottom left and hit "patch Key Vault"
6- (This is where your DVD key and Drive Type comes in handy) Then copy your DVD key and look for your Drive type in the scroll box. *Note- If you do not do this your JTAG could be damaged
7- Then lastly, save that file as "updflash.bin"


FINAL STAGE
1- Place the updflash.bin file onto the root of your USB
2- Place the USB into your JTAG and direct yourself to xexmenu
3- once you are in xexmenu browse in the USB tab for 360 Flash tool
4- Hit "A" to rewrite you current NAND
5- Hit "B" to rewrite you NAND without keeping your current KV
6- Hit "Start" to allow a mismatch to occur (sometimes you have to hit start twice)
7- Then Finally hit "A" to continue on with the procedure
8- Hit any button to continue
9- Then hit the "Back" button twice to reboot your JTAG


You should finally be unbanned and ready to host




THE NEW WAY TO ADD A KV USING JUST EXBLS:
This is the new way to flash KV onto your JTAG/RGH/DEV KIT with out having to go use flash 360.

NOT EVERYONE KNOWS ABOUT THIS SO I THOUGHT I WOULD ADD A TUT.


1. First pull out your ethernet cable/disconnect your console from the internet.
2. Put your NEW KV and cpu file on your USB.
3. Copy the two files on to the root of your HDD
4. Now turn off your console, then turn it back on
5. When it turns on it should say "Reboot to finalize". Do as it says and reboot.
6. When it reboots it will say "EXBLS disconnected network error".
7. Once it says this message, turn off the console.
8. When the console is turned off, Plug your ethernet cable back in.
9. Turn your console back on.
10. When it boots up it should say "EXBLS platinum fully stealth"
11. NOW YOU CAN GO ONLINE!!!




TRUSTED KV SELLERS:
- JTM Boss
- PCP


JTM Boss skye: JTM Boss

PCP AIM: PCP008 // KVs




How To System Link Infect:

THIS IS A TUT ON HOW TO SYSTEM LINK INFECT YOUR RETAIL. I AM USING MW2 XP PATCH FOR A EXAMPLE BUT THIS WILL WORK THE SAME WAY AS ANY OTHER COD (FOR EXAMPLE COD4 IS Patch_mp.ff INSTEAD DLL.)

JTAG/RGH/Dev Kit.
Retail xbox 360
Modded .DLL File & Modded Default_mp.xex/Default_mp_Launcher.xex


Once you have Copy & Pasted your files into your MW2 Game Root Folder, than you need to start up your JTAG/RGH/Dev. Kit.
Go into XeXMenu and go to you MW2 Game Root Folder.
Scroll down to your Default_mp.xex/Default_mp_Launcher.xex File and launch it.
Go to System Link --> Create Match. Then Start the game.
Now start up your retail, take a Ethernet Cord and connect your Retail and JTAG/RGH/Dev. Kit to each other.
On your retail join your JTAG/RGH/Dev. Kit's Match.
Press the Back Button on your JTAG/RGH/Dev. Kits Controller, text should show up on the screen.
Once infection is completely back out on your retail and go into private match, Invite your friends and start the game.
It should end 5 mins. after the countdown is finished.
Now you should have been forced into a Public FFA Match.





How to load MW2 Dll.

This very simple but i have included it because some people don't know.


1. Copy Dll. onto your USB (this might come with a default_mp.xex) if so put that on USB swell.
2. Place the Dll. and the default_mp.xex into your MW2 directory.
3. If it asks to replace the existing file, do it.
4. Once all files are in the correct place find the default_mp.xex and click on it.
4. Your Dll. will load



List of MW2 Tu8 menus + DOWNLOADS


Just thought i would add some of my favourite MW2 Tu8 menus + DOWNLOAD Links


I DONT TAKE ANY CREDIT FOR THESE MENUS, I DID NOT CREATE THEM, I AM JUST SHARING WITH THE COMMUNITY.


Project Razor v2

Click to Hide Content
http://www.mediafire.com/download/0i3h31...Ti0nZz.rar


Tesseract v2.0

Click to Hide Content
http://www.mediafire.com/download.php?y0fr64v0dnb853d



XeModding V3

Click to Hide Content
http://www.mediafire.com/?8ou6iz04eqo1616



Vanguard v1

Click to Hide Content
http://www.mediafire.com/?wiuouy6r0yjr2f4



Project Radiation

Click to Hide Content
http://www.mediafire.com/?kcvovf0h77fn25u



Back In Time

Click to Hide Content
http://www.mediafire.com/?fvclw7hy99t9jd9




Project 7

Click to Hide Content
http://www.mediafire.com/?rknj86fkpuk



Tu8 Files
Click to Hide Content
http://www.mediafire.com/?n5g7rn22ue6sm82
 
Last edited by a moderator:
V

VxPz Visionzz

Enthusiast
Messages
229
Reaction score
28
Points
85
Sin$
0
I put the tu8 files on my usb and put them in my folder.am i supose to open the folder to get those other files like rhe tu one?and my .dll didnt come with a default _.mp xex.and i put back in time v2 onto my mw2 dir.but u click it and it wont load.was i soupose to copy the dvd or could i just copy and paste the game cuz thats what i did please help.
 
Stoner

Stoner

THC is a natural medicine
Messages
2,070
Reaction score
1,217
Points
500
Sin$
0
This came in really handy thanks for this think you can add stuff for cod ghosts :biggrin:
 
T

Trenton1234

Newbie
Messages
32
Reaction score
2
Points
45
Sin$
7
This will help me a lot since I just got my console back yesterday an was very confused on what to do to get mods onto the games.
 
Sanctorum

Sanctorum

Banned
Messages
2,391
Reaction score
683
Points
240
Sin$
0
I tried installing MW2 to my HDD following the steps above EXACTLY. I tried installing the game through xexmenu 3 times, two of which, only 3 files were installed, the last time, no files were installed at all. I then tried twice in FSD3 to install the game. First try, it made it to 68% installed and then stopped, the second try in FSD3, I only made it to 3% installation. Anyone know what this issue is that I'm having and how to resolve this?
 
cobra248

cobra248

Enthusiast
Messages
477
Reaction score
107
Points
115
Sin$
7
do you need freesttyle dash to install or no?
i tried to install games but its not working.
also with my tu update only came the one file, nothing else with it.
but i couldnt even load the disk on 360 normally.
thats why itried to install.
 
F

Fragr

Newbie
Messages
7
Reaction score
0
Points
35
Sin$
0
When I click multiplayer it goes to a blinking black screen, any fix?
 
Idleparasite

Idleparasite

Enthusiast
Messages
203
Reaction score
18
Points
70
Sin$
0
Thx one more thing how do I give people my mod menu to there jtag/rgh
 
Vladimir Levin

Vladimir Levin

Newbie
Messages
5
Reaction score
0
Points
35
Sin$
7
Do all these method's still work' ? Just got my Corona Rgh
 
Fingrbngkilr970

Fingrbngkilr970

Enthusiast
Messages
446
Reaction score
92
Points
95
Sin$
7
I cant go into a public Cod4 match on my jtag with a patch. Wtf?
 
VeonCaptures

VeonCaptures

Newbie
Messages
6
Reaction score
0
Points
35
Sin$
7
Just recently bought my RGH console. I'm just wondering if I need to buy a Kv as I still have the retail kv unbanned
 
Casp

Casp

VIP
VIP
Retired
Platinum Record Scaling the Mountain TotM
Messages
2,994
Solutions
1
Reaction score
6,176
Points
2,772
Sin$
7
Just recently bought my RGH console. I'm just wondering if I need to buy a Kv as I still have the retail kv unbanned
You don't need to buy a KV until the retail KV is banned.
 
Status
Not open for further replies.
Top Bottom
Login
Register