What's new

Tutorial Alternative points for various glitch/RGH chips/boards (x360 ace, matrix, coolrunner...)

  • Thread starter JoinTheResistance
  • Start date
  • Views 10,419
J

JoinTheResistance

Dead to the world, alive for the journey...
Messages
4,669
Reaction score
1,100
Points
1,045
Sin$
7
Ace V3
ace_V3_alt.jpg


Matrix glitcher V1/V3
matrix_alt.jpg

You can use the purple points next to "F" as an alternative to the "C" point, but if you do, make sure that you short the yellow and purple points that are right above "D" and "E", otherwise it won't work.

Coolrunner rev C (also works for rev D)
rev_c_alt.jpg


More chips coming soon!
 
Last edited:
Lucky

Lucky

HYX's stamp of approval!
Super Moderators
Premium
Scaling the Mountain Beginning of An Odyssey Bright Idea
Messages
4,660
Solutions
13
Reaction score
1,717
Points
1,650
Sin$
0
Would this be useful incase you bring the solder pad up?
 
K

k3nn

Newbie
Messages
10
Reaction score
0
Points
45
Sin$
7
Is there any alt point for TMS, TDI, TDO and TCK on Matrix v3 board? I'm asking it because I broke the solder pad. Thank you
 
Last edited:
J

JoinTheResistance

Dead to the world, alive for the journey...
Messages
4,669
Reaction score
1,100
Points
1,045
Sin$
7
Hi, i need a alternative 1,8 v point on ace v3
You can solder either to the bottom pad of the removed diode/resistor or to the pad next to it. Though, I'm not sure it's going to work if you've damaged one of the pads.
 
Last edited:
P

pasmatic84

Newbie
Messages
3
Reaction score
0
Points
35
Sin$
7
I blow 1,8v and bottom pad diode only up pad is save :frown:, and in xenon where is 1,8v??
 
Hect0r

Hect0r

Enthusiast
Messages
81
Reaction score
17
Points
95
Sin$
7
Ace V3
ace_V3_alt.jpg


Matrix glitcher V1/V3
matrix_alt.jpg

You can use the purple points next to "F" as an alternative to the "C" point, but if you do, make sure that you short the yellow and purple points that are right above "D" and "E", otherwise it won't work.

Coolrunner rev C (also works for rev D)
rev_c_alt.jpg


More chips coming soon!
Thanks dude, saving this in my bookmarks incase I ever need it :smile:
 
Nixir Mods

Nixir Mods

Newbie
Messages
1
Reaction score
0
Points
35
Sin$
0
on the ace v3 i need an alt for c i ripped the pad and i do not under stand what the orange line is
 
J

JoinTheResistance

Dead to the world, alive for the journey...
Messages
4,669
Reaction score
1,100
Points
1,045
Sin$
7
on the ace v3 i need an alt for c i ripped the pad and i do not under stand what the orange line is
It's a trace. You scrape it with an x-acto knife and solder to it.
 
Rpidemon

Rpidemon

Enthusiast
Messages
108
Reaction score
4
Points
100
Sin$
0
matrix_alt.jpg

You can use the purple points next to "F" as an alternative to the "C" point, but if you do, make sure that you short the yellow and purple points that are right above "D" and "E", otherwise it won't work.

Is lead 27 on the IC for the LED debug mod still the same on these revisions of the matrix (the one above the alternative c point) as all the guides I have seen have the earlier versions of the chip with another solder pad for direct soldering bottom left of the small cap right of the IC.
 
B

BluesMan67

Enthusiast
Messages
583
Solutions
18
Reaction score
98
Points
150
Sin$
7
Ace V3
ace_V3_alt.jpg


Matrix glitcher V1/V3
matrix_alt.jpg

You can use the purple points next to "F" as an alternative to the "C" point, but if you do, make sure that you short the yellow and purple points that are right above "D" and "E", otherwise it won't work.

Coolrunner rev C (also works for rev D)
rev_c_alt.jpg


More chips coming soon!
No pics though :frown: please could you re-upload the pictures.Thanks so much
 
Top Bottom
Login
Register