What's new

Tutorial Alternative points for various glitch/RGH chips/boards (x360 ace, matrix, coolrunner...)

  • Thread starter JoinTheResistance
  • Start date
  • Views 7,147
J

JoinTheResistance

Dead to the world, alive for the journey...
Messages
4,670
Reaction score
1,082
Ace V3


Matrix glitcher V1/V3

You can use the purple points next to "F" as an alternative to the "C" point, but if you do, make sure that you short the yellow and purple points that are right above "D" and "E", otherwise it won't work.

Coolrunner rev C (also works for rev D)


More chips coming soon!
 
Last edited:
N

NfX

ex-CoD Hoster
Messages
2,984
Reaction score
793
Would this be useful incase you bring the solder pad up?
 
J

JoinTheResistance

Dead to the world, alive for the journey...
Messages
4,670
Reaction score
1,082
Would this be useful incase you bring the solder pad up?
Yes, that's mainly what the alternative points are for.
 
K

k3nn

Newbie
Messages
9
Reaction score
0
Is there any alt point for TMS, TDI, TDO and TCK on Matrix v3 board? I'm asking it because I broke the solder pad. Thank you
 
Last edited:
X

xXFalconLobbiesXx

Enthusiast
Messages
53
Reaction score
3
Is there alternate solder points on the Trinity mobo
 
P

pasmatic84

Newbie
Messages
3
Reaction score
0
Hi, i need a alternative 1,8 v point on ace v3
 
J

JoinTheResistance

Dead to the world, alive for the journey...
Messages
4,670
Reaction score
1,082
Hi, i need a alternative 1,8 v point on ace v3
You can solder either to the bottom pad of the removed diode/resistor or to the pad next to it. Though, I'm not sure it's going to work if you've damaged one of the pads.
 
Last edited:
P

pasmatic84

Newbie
Messages
3
Reaction score
0
I blow 1,8v and bottom pad diode only up pad is save :frown:, and in xenon where is 1,8v??
 
H

Hect0r

Enthusiast
Messages
72
Reaction score
13
Ace V3


Matrix glitcher V1/V3

You can use the purple points next to "F" as an alternative to the "C" point, but if you do, make sure that you short the yellow and purple points that are right above "D" and "E", otherwise it won't work.

Coolrunner rev C (also works for rev D)


More chips coming soon!
Thanks dude, saving this in my bookmarks incase I ever need it :smile:
 
N

Nixir Mods

Newbie
Messages
1
Reaction score
0
on the ace v3 i need an alt for c i ripped the pad and i do not under stand what the orange line is
 
J

JoinTheResistance

Dead to the world, alive for the journey...
Messages
4,670
Reaction score
1,082
on the ace v3 i need an alt for c i ripped the pad and i do not under stand what the orange line is
It's a trace. You scrape it with an x-acto knife and solder to it.
 
R

Rpidemon

Enthusiast
Messages
108
Reaction score
4

You can use the purple points next to "F" as an alternative to the "C" point, but if you do, make sure that you short the yellow and purple points that are right above "D" and "E", otherwise it won't work.

Is lead 27 on the IC for the LED debug mod still the same on these revisions of the matrix (the one above the alternative c point) as all the guides I have seen have the earlier versions of the chip with another solder pad for direct soldering bottom left of the small cap right of the IC.
 
I

ipodbrian19

Newbie
Messages
5
Reaction score
0
Does anyone still have these images?
 
B

BluesMan67

Enthusiast
Messages
292
Reaction score
33
Ace V3


Matrix glitcher V1/V3

You can use the purple points next to "F" as an alternative to the "C" point, but if you do, make sure that you short the yellow and purple points that are right above "D" and "E", otherwise it won't work.

Coolrunner rev C (also works for rev D)


More chips coming soon!
No pics though :frown: please could you re-upload the pictures.Thanks so much
 
Top Bottom