Solved Ace V3 Won't Boot into Xell

[SiimPlisticModz]

Hope I'm in the correct place but I have being doing rghs for the last year and so far I've only sold phats and so recently I have picked up a trinity and started working on it but after I have wrote the ecc and programmed the ace v3 it will not boot into xell so I'm unable to get the CPU key to write the nand. The chip seems to be trying to glitch but it won't boot into xell I have posted a video on YouTube for a friend and I will link it so you can see my problem

 

[Killjoy666]

You Have 15432 SRGH Files? If Yes Try This Two

300 Mhz > Timming_60.6 > TR_L_0.5_T_60.6.xsvf
Or
300 Mhz > Timming_60.3 > TR_L_0.5_T_60.3.xsvf

 

[SiimPlisticModz]

You Have 15432 SRGH Files? If Yes Try This Two

300 Mhz > Timming_60.6 > TR_L_0.5_T_60.6.xsvf
Or
300 Mhz > Timming_60.3 > TR_L_0.5_T_60.3.xsvf

Have tried both of them but I will try again and let you know thanks for ur help

 

[SiimPlisticModz]

You Have 15432 SRGH Files? If Yes Try This Two

300 Mhz > Timming_60.6 > TR_L_0.5_T_60.6.xsvf
Or
300 Mhz > Timming_60.3 > TR_L_0.5_T_60.3.xsvf

UPDATE: I have tried both of them and double checked my soldering but still nothing

 

[Killjoy666]

Have tried both of them but I will try again and let you know thanks for ur help

Can You Post Picture Of The Installation. 
Also Have You Tried Using Trinity_Ace.Ecc Located In The Speed Folder Inside The 15432

 

[SiimPlisticModz]

Y

Can You Post Picture Of The Installation.

Can You Post Picture Of The Installation. 
Also Have You Tried Using Trinity_Ace.Ecc Located in The Speed Folder Inside The 15432

ive been told to use this ecc but I'm not exactly sure how...

 

[Killjoy666]

You Would Select The First Source Where The Nand 1 Is And Look For It On Your Desktop After You Select It Click Write Ecc And Choose Trinity As The Motherboard That's All.

 

[Killjoy666]

Regarding The Pictures Would Need To See The Soldering Making Sure Work / Points Are Correct.

By Looking At Them We Can Further Assist, It's Like Having A Teacher Check Your Work Making Sure Everything Is Okay.

 

[SiimPlisticModz]

You Would Select The First Source Where The Nand 1 Is And Look For It On Your Desktop After You Select It Click Write Ecc And Choose Trinity As The Motherboard That's All.

Used the TRINITY_ACE.ecc and still nothing. The green light comes on for like 1.5 seconds then comes back on then goes off again and this just keeps happening

 

[Killjoy666]

Used the TRINITY_ACE.ecc and still nothing. The green light comes on for like 1.5 seconds then comes back on then goes off again and this just keeps happening

Might Be A Soldering Issue, Can You Post Pictures Of The Installation.

 

[SiimPlisticModz]

Regarding The Pictures Would Need To See The Soldering Making Sure Work / Points Are Correct.

By Looking At Them We Can Further Assist, It's Like Having A Teacher Check Your Work Making Sure Everything Is Okay.

 

[Killjoy666]

Your E / F Point Are Wrong Should Be Opposite, Also Make Sure Your Post_Out Ain't Touching The Other Point.

 

[SiimPlisticModz]

Your E / F Point Are Wrong Should Be Opposite, Also Make Sure Your Post_Out Ain't Touching The Other Point.

Fml I followed the weekend modders tutorial but idek bout him

 

[Killjoy666]

Fml I followed the weekend modders tutorial but idek bout him

Just Swap Them And Make Sure Post Out Wire Ain't Contacting Another Point You Can Trim If You Like It.

After That Give It A Boot And Should Work.

 

[SiimPlisticModz]

Just Swap Them And Make Sure Post Out Wire Ain't Contacting Another Point You Can Trim If You Like It.

After That Give It A Boot And Should Work.

Ight thx bub I'll let u know if I am succesful

 

[SiimPlisticModz]

Sadly still no boot into xell

 

[Killjoy666]

What File Is Flash To The Ace?

 

[SiimPlisticModz]

What File Is Flash To The Ace?

TR_L0_0.5_T_60.6.xsvf tho I had tried
TR_L0_0.5_T_60.3.xsvf as well and many others and still nothing just continues to try and glitch

 

[Killjoy666]

Can You Post Pictures After The Swap Of Wiring.

 

[SiimPlisticModz]

Can You Post Pictures After The Swap Of Wiring.

I just switched the wires on the ace it's self...