What's new

Solved 360 doesnt show video?

mrgeo20

mrgeo20

Enthusiast
Messages
732
Reaction score
61
Points
95
Sin$
7
I have a JTAGable console that my friend gave me but he said it only displays audio and doesnt show video on the screen, Ive tried the xbox on TV and HDTV settings and neither show video. I cant even get it to produce sound on any setting. Its a non-hdmi xenon so I cant try an hdmi cable, the AV cables I used are tested and work fine with the 3 other 360s I have, 2 of those being xenons. If there is any solution to this problem Id appreciate some help, I looked around and all I could find was that this is a general hardware failure and Id have to send it to M$ but this console has no warranty so thats not an option.

edit: Ive been reading around and apparently the x-clamp fix actually solves this problem?
 
Chotton

Chotton

Computer Specialist
Mythical Veteran Legendary Veteran Fabled Veteran
Messages
4,697
Reaction score
745
Points
715
Sin$
0
Don't do any of that. I had this problem today.
If you can hear the sound when it boots, do this.
If not, reflow.
Okay, all you is turn on your console with the GUIDE button on your controller.
This next part is crucial.
Hold down (Y) and [Right Trigger] for fifteen seconds.
This should reset the video settings on the console.
Hope I helped.
 
Sol Invictus

scopen4

Contributor
Messages
2,643
Reaction score
637
Points
325
Sin$
0
Don't do any of that. I had this problem today.
If you can hear the sound when it boots, do this.
If not, reflow.
Okay, all you is turn on your console with the GUIDE button on your controller.
This next part is crucial.
Hold down (Y) and [Right Trigger] for fifteen seconds.
This should reset the video settings on the console.
Hope I helped.

Thats not always the case, most of the time the HANA chip needs reflowed or blow dryer gunned.
 
Top Bottom
Login
Register