E05: CPU over heating - If you are receiving this error after disassembling your console make sure to all 8 of the heatsinc screws are tightened securely to the board/heatsink holes.when i loosen the big tall ones screws i get the 0011 error, man i just cant win
This can cause 0020, but you will not unless you recently were messing with the inside of your console.The heat sink bolts are to tight. Just loosen them up to fix it.
This can cause 0020, but you will not unless you recently were messing with the inside of your console.
Everyone says this error requires a reball to fix, but from my experience a reflow always does the trick. RRoDs that happen naturally will nearly never need a reball.
Professional Reflow or Reball would be your best bet. 0020 can be a range of things. Cold/broken solder joint, dead GPU, dead EDRAM. Youtube and google fixes can sometimes damage, stress, or flex the the xbox motherboard. If you are interested in repairing it, let me know! Check my signature.i have the 0020 error code, any tips on fixing it? i tried youtube and google with no success.
Isn't it 0002 that means your MOSFETs are bad?I was looking around and I heard that older consoles get errors from a piece on the motherboard called MOSFETS but you will just have to Re-flow the GPU ,CPU and if that doesnt work look here http://www.se7ensins.com/forums/topic/402979-mega-repair-tutorial-thread/