What's new

Solved 0020 error

  • Thread starter honam1021
  • Start date
  • Views 332
H

honam1021

Enthusiast
Messages
176
Reaction score
7
I have a 3 RRoD (0020) falcon and I can't figure out how to fix it.

It goes to RRoD within 1 second after it've been turned on.I heard about that is hana related.I tried to apply pressure on the hana chip while I turn on the console,it didn't work.

I tried the same with the south bridge,didn't work either.

I tried this heat gun fix twice,same error.

Is that console unfixable?
 
G

GOHDtoughguy

THE WHEEL ON THE SHORT BUS GO ROUND AND ROUND
Messages
2,706
Reaction score
373
I have a 3 RRoD (0020) falcon and I can't figure out how to fix it.

It goes to RRoD within 1 second after it've been turned on.I heard about that is hana related.I tried to apply pressure on the hana chip while I turn on the console,it didn't work.

I tried the same with the south bridge,didn't work either.

I tried this heat gun fix twice,same error.

Is that console unfixable?
You could send it to someone to rebal it.
 
G

GOHDtoughguy

THE WHEEL ON THE SHORT BUS GO ROUND AND ROUND
Messages
2,706
Reaction score
373
Getting reball service from someone else is too expensive.Can I use a home oven and some tool to do a reball at home?
Don't try anything else!
 
U

UnlinkedSquare

Getting There
Messages
1,489
Reaction score
140
Getting reball service from someone else is too expensive.Can I use a home oven and some tool to do a reball at home?
It may seem expensive but you rather buy a new xbox or have it fixed for a lot less?
 
H

honam1021

Enthusiast
Messages
176
Reaction score
7
I will try the oven fix first.Since it is the best reflow you can do at home
 
G

GOHDtoughguy

THE WHEEL ON THE SHORT BUS GO ROUND AND ROUND
Messages
2,706
Reaction score
373
G

GOHDxXKILLERSXx

I Love Rita Ora <3<3<3
Messages
1,078
Reaction score
213
Getting reball service from someone else is too expensive.Can I use a home oven and some tool to do a reball at home?
Really thoe?
 
Top Bottom