If you get nothing from any of the ports then it's likely your Southbridge. Have you tried testing with a flash drive to see if it shows up under storage?
It supports all motherboards.
Simple NAND Flasher 1.4b Download
And to save you any confusion in the future, you have a 16mb Trinity. All Trinity motherboards are 16mb, some come with an internal 4gb module but those are nothing more than proprietary "flash drives" plugged directly into the...
Well your problem seems to be fixed but just in case you still want your reset code to remove the parental controls it can be found in the SMC config. Download J-Runner and open your NAND in it then go to edit config to get your reset code.
Example:
Here is mine:
In this picture you'll...
The reason I added the button to the diagram was because the SX being powered all the time was causing issues outputting video when docked. Someone else has done this install as well and didn't have the same issue. So the answer is yes and no. Try it without a button and if you experience the...
They're just standard JST connectors. I've used Digikey to replace quite a few XDK cables. Here is an example: https://www.digikey.com/product-detail/en/jst-sales-america-inc/PHDR-14VS/455-1172-ND/608614
You'll want to go through and find the correct pin count obviously as well as some...
Super insightful. Thanks for sharing.
Edit: Definitely an XCGPU issue. The console is a month out of the 60 day warranty but since the issue happened so soon after the customers warranty expired I'm going to go ahead and replace the system for him entirely.