How to Softmod your Xbox with SID 4.0

[ForrrestMaster]

Um, the best thing I can say to you is to resoftmod your xbox. The NKpatcher seems to deteriorate over time. I dunno why it does that, but it does. So yeah, I would resoftmod.

[suasponte375]

OK, what is the correct way to do that. I tried the "restore softmod" option in SID4, but now I get an intermittent "13" error.

Do I select "uninstall softmod", or "restore ms dash", or some other method?

Thanks

[ForrrestMaster]

Well, If you get that error, you may have to unistall the hard way. Let me go grab the tut.
ForrestMaster's Guide to fixing errors 13,14,16,20,21

[suasponte375]

Ok,
I have the xbox fixed with the SID4.0 softmod where it will now boot up correctly, Dual Boot/open = retail. And I can switch to xbmc vial the evox apps menu.

Now I want to upgrade the hd to a 320gig that I have and I have read this tut TechFreaks v2 a couple times but it does not seem to be written for the SID4.0 softmod drive format since SID4.0 uses a "phantom" C:. I have no files in C: but I have a significant amount of files in E:, X: and Z:
So if I follow the steps in the hd tut some of my files will not be sent to the new/larger hd.
What do I do?
Thanks for the help.

[ForrrestMaster]

First of all. Dont listen to that spider kid. He will be gone soon

Secondly, The Shadow C is protecting your HDD. If you want an app that will bypass it and allow you to get to it. Use this app by me haha.

Bypassing Shadow C and Eeprom Backup

Then you can follow that tut, or you can go ahead and use another of my tuts to make it, and it has pictures and ALL the files you need

Reformatting your Xbox HDD with NDURE Softmod Exploit

Wow, I make a lot of useful tutorials lol

[gus738]

Breyden you are welcome, Also how did the upgrade go? WD is a very reliable brand and just to confirm, you don't need a modchip for big hdd a softmod will do as long as the original EEPROM is put in the new hdd and is locked. any size is possible on the xbox.

Quote: Originally Posted by Breyden

Thank you for the very helpful post! I think I will upgrade the HDD then when I have a bit of extra cash. Again, thank you!

Quote: Originally Posted by Breyden

Is there any reason why a newer production hdd of an extremely large size (more than 160gb) wouldn't work? I am lost on this whole locking and unlocking hdd thing. Would the Xbox software even support a larger hdd?

Another question... Most of the posts I have been reading when googling about upgrading an Xbox hard drive say that you have to have a hard mod chip installed, is this the case anymore?

Suasponte If I understand your post correctly you are saying that your xbox Is modded with sid4 and when you turn it on it Always puts ms dash correct?

If so check if the led circle is green or red, More likely it will be red If so the xbox is working properly And the reason why it runs into ms dash is because the time has not been set correctly.

The original xbox resets the time after being unplug from power for more then 3 hrs.

Just set the time correctly and the xbox will load fine.

for the upgrade in hdd see the link in my sig it is one of the easiest methods.

Also this goes for EVERYONE when making a new / bigger hdd you are going to start fresh once you have sucessfully made the new hdd and it works with your xbox (booting up ms dash) you will Re mod from there.

ForrrestMaster spyder is the main guy here

Also yes the shadow C is coded to protect from simple mistakes So if you are trying to show how to avoid or to remove shadow C

then why use sid 4 to begin with? Also when done properly you can install apps / games / pics / vids / music/ emu/roms etc etc with no issues.....



So suaponte just fellow the steps and once new hdd works re mod with sid 4

Quote: Originally Posted by suasponte375

Hello,
first post on se7ensins. I have a previously modded xbox with original 8gig hd that has been in storage for some time. However, it only boots to regular ms dash. I can use the SID4 / SplinterCell-Linux exploit to log into evox. Once in the softmod, I can explore files and start unleashx and xbmc.

Both the evoxdash.xbe and the xbmc "default.xbe" are on the "E:" drive.

Question --- How do I get the xbox to load up xbmc on boot up?

Question --- Once that is done, what is the best way to upgrade the hard drive? I have seen several tuts, but not sure which one to use with my current softmod setup. I have a Maxtor 320 gig that I want to use to hold ROMS, play my xbox games of hdd, and store vids, etc.

Question --- Any other recommendations / tut recommendations regarding games from hdd, ROMS, etc?

Thanks for you help.

Quote: Originally Posted by ForrrestMaster

First of all. Dont listen to that spider kid. He will be gone soon

Secondly, The Shadow C is protecting your HDD. If you want an app that will bypass it and allow you to get to it. Use this app by me haha.

http://www.se7ensins.com/forums/xbox-support/90740-bypassing-shadow-c-and-eeprom-backup.html

Then you can follow that tut, or you can go ahead and use another of my tuts to make it, and it has pictures and ALL the files you need

http://www.se7ensins.com/forums/xbox-softmod/91300-reformatting-your-xbox-hdd-ndure-softmod-exploit.html

Wow, I make a lot of useful tutorials lol

[suasponte375]

gus738,
current state is my factory 8 gig hd in my ver 1.6b xbox is softmoded with SID4.0 and works correctly where "open on = retail/factory boot (green LED)" and "power on = evox boot (red LED)".

The part I am confused about in all of the large hdd mods using xboxhdm is that it refers to copying over my C:/ folder files and I do not have any since my SID 4.0 modded xbox uses the "phantom C:/" and there are no (zero) files in my C:/ drive to copy to the xboxhdm C: folder.

All the files that are shown in the hdd tut you referenced in your email as being in C: are actually in E:\backup\eeprom. There is also one additional file in this location titled "SID4" with a file size of 4 kb.

Ok, I reread your post and I think I should just take the files shown in the tut as located in C:\ which are actually located in my xbox E:\ folder (less the SID4 file) and put it in the C;\ folder of the xboxhdm folder. Is that correct?

Then everything else in my E:\ (like xbmc) goes into the E: drive ? Or is it just certain files in the E:\ drive? The tut doesn't specify which files if not all of them are copied/ftp over to xboxhdm.

If I understand correctly, you are saying the the large hdd mod results in the large hard drive looking like a factory hd other than the size. Correct? Then the next step is to run a full softmod on the larger disk. I assume there will be steps in the softmod for the larger disk to create partitions to use the larger size of the hd. Is that correct? If so, do you have any recommendations regarding size / partions setup?

Thanks

[ForrrestMaster]

Use XboxHDM and an app that lets you bypass the Shadow C and allows you to copy your C drive. I recommend

Forrest's Tools
Bypassing Shadow C and Eeprom Backup

[gus738]

ok how about this to make it simple, to make a new hdd with a softmod you just need

a ms dash which is 5960 (found on E/backup/

and your EEPROM (found again on e/backup/

the ms dash can also be found on the internet,

once you have those 2 files get a hdd (your choice of size)

fellow the link on my sig

if you did it right your xbox should load ms dash as if its your first time turning on the xbox (only you have a bigger hdd)

once you did that you re do your softmod again

at this point you can use aid to install your apps emus / roms etc etc

easiest way is that way.

normal everything is on C but we shdow it so its moved to E/backup/

any more Q's go for it

Quote: Originally Posted by suasponte375

gus738,
current state is my factory 8 gig hd in my ver 1.6b xbox is softmoded with SID4.0 and works correctly where "open on = retail/factory boot (green LED)" and "power on = evox boot (red LED)".

The part I am confused about in all of the large hdd mods using xboxhdm is that it refers to copying over my C:/ folder files and I do not have any since my SID 4.0 modded xbox uses the "phantom C:/" and there are no (zero) files in my C:/ drive to copy to the xboxhdm C: folder.

All the files that are shown in the hdd tut you referenced in your email as being in C: are actually in E:backupeeprom. There is also one additional file in this location titled "SID4" with a file size of 4 kb.

Ok, I reread your post and I think I should just take the files shown in the tut as located in C: which are actually located in my xbox E: folder (less the SID4 file) and put it in the C; folder of the xboxhdm folder. Is that correct?

Then everything else in my E: (like xbmc) goes into the E: drive ? Or is it just certain files in the E: drive? The tut doesn't specify which files if not all of them are copied/ftp over to xboxhdm.

If I understand correctly, you are saying the the large hdd mod results in the large hard drive looking like a factory hd other than the size. Correct? Then the next step is to run a full softmod on the larger disk. I assume there will be steps in the softmod for the larger disk to create partitions to use the larger size of the hd. Is that correct? If so, do you have any recommendations regarding size / partions setup?

Thanks

[suasponte375]

Thanks to gus738 and ForrrestMaster!
I finished the softmod and 160g hd install this weekend. Streaming music/videos/pics from my home server, playing games from the hd, and etc. It works great.

[gus738]

Enjoy

[discgolfer72]

hey i have been moding xbox for years now and just purchased a new modded xbox and it seems someone used sid installer for this xbox and for the life of me i cannot find a eeprom.bin file anywhere
there is also no dashboard folder in the e directory i am wanting to wipe the hd and start fresh with my installer so i can install xb,c as the main dash can anyone help me out

thanks in adv

well thanks to forrest im ready to make my hd


hey forrest you rock thanks for the extras app it worked like a charm

[gus738]

Whats the current status of your xbox now discogolfer?

[Jif]

Hey guys,

I've soft modded 3 Xbox'es in my day, and never had a shred of problems. After getting a batch process error with one, I switched from nDure to SID4. It installs completely, and when I boot up I get an MS dash with a red LED. I played a few different games in campaign for a few minutes, saved, ejected, turned off and on again, and the same problem keeps happening. I end up back at the MS Dash asking me for time. Any idea why this would screw up so bad? It's rather displeasing. Hitting eject to boot brings me to the SID installer menu, even with no game in, which se