mod controller

[GreenBean7]

hey can u guys help me on where to find the spots 2 solder the wire 2 the led thing i cant find the spot 2 rapid fire

[joecool21]

Is the controller wired or wireless. if wireless do you know if it is the old style board or new. Old have two square chips on the back of the board and new style has a chip at a 45 degree angle on the back. if you have the new style then you won't be able to do the rapid fire that you are trying. If you have the old style then there are two points that you need to solder to. Use the middle pin in the picture but as for the ground i found it better to use the pin farthest to the left in the group of pins near the mic plugin. (I circled it in the picture.) Its less in the way off the button pads and easier to route. hope this helps.