 | ||
parts i'll need
| ||
| Notices |
 |
 |  |
 |
| | LinkBack | Thread Tools | Display Modes |
09-11-2008, 08:21 AM
| #1 (permalink) | ||||||
| 7S Enthusiast
Join Date: Sep 2008
Posts: 80
Tournaments Joined: 0 Tournament Wins: 0 Gave Thanks: 8
Received Thanks: 5
Nominated 0 Times in 0 Posts TOTM Award(s): 0  | parts i'll need ok, so as its known by most of your i've been looking into modding my 360...well as im happy to say im gonna attempt a mod this weekend i hope, ok so i have the older hitachi which all you have to do is open it and hook it up to the comp and do the modeb and all that and flash the drive, alright so im trying to figure out what all ill need so im gonna make a list and put what i know and if i have it already ill put OK next to it, im hopeing to go to radio shack later today to get everything im missing i think. So here goes burner- OK Double Layered CD(verbatims prolly)- Xbox 360(LOL)- OK Slax Linux LiveCD - got it Sata Cable-got it torx screwdriver- OK and thats all i can think of, am i missing ne thing? ------------------------------------------------------------------------------ going this weekend to get it all now  wow so i talked to my dad when he got home, and he has everything i need but the verbatims, and ill have 254$ to waste at office depot,hmm guess ill get a ton of verbatims for 12.99$ cough cough and a nice big external hd? ahahahah if i got nothing but verbatims i could get almost 300blank cds lol  Last edited by blink18247; 09-11-2008 at 08:23 PM. | ||||||
|  |
| |
|
09-11-2008, 08:33 AM
| #2 (permalink) | ||||||
| Se7en Sinner
 Join Date: Jul 2006 Location: South Carolina
Posts: 8,873
Tournaments Joined: 0 Tournament Wins: 0 Gave Thanks: 158
Received Thanks: 417
Nominated 0 Times in 0 Posts TOTM Award(s): 0    | Re: parts i'll need You don't need a resistor or 2 ball point pins... That's really old school dude. haha. Download a SLAX Linux LiveCD, so much easier. And you'll also need a SATA cable. | ||||||
|
| |
| |
|
09-11-2008, 08:35 AM
| #3 (permalink) | ||||||
| 7S Enthusiast
Join Date: Sep 2008
Posts: 80
Tournaments Joined: 0 Tournament Wins: 0 Gave Thanks: 8
Received Thanks: 5
Nominated 0 Times in 0 Posts TOTM Award(s): 0 | Re: parts i'll need well then can someone post a new guide for this one, the guide someone posted for me was an old one talking about how to do it with the pins and all that and what kind/ size sata cable, there are so many different kinds it shows Last edited by blink18247; 09-11-2008 at 08:38 AM. | ||||||
|
| |
| |
|
09-11-2008, 08:41 AM
| #4 (permalink) | ||||||
| Senior Member
 Join Date: Jun 2008 Location: NC
Posts: 1,395
Tournaments Joined: 0 Tournament Wins: 0 Gave Thanks: 51
Received Thanks: 153
Nominated 0 Times in 0 Posts TOTM Award(s): 0 | Re: parts i'll need Here's a good guide 360Mods Downloads Textbook's Xbox 360 Firmware Flashing Tutorial It will tell you everything you need | ||||||
|
| |
| The Following User Says Thank You to Xpargas For This Useful Post: | blink18247 (09-11-2008) |
| |
|
09-11-2008, 10:21 AM
| #5 (permalink) | ||||||
| 7S Enthusiast
Join Date: Sep 2008
Posts: 80
Tournaments Joined: 0 Tournament Wins: 0 Gave Thanks: 8
Received Thanks: 5
Nominated 0 Times in 0 Posts TOTM Award(s): 0 | Re: parts i'll need thanks what else could i use besides a torx 10 screwdriver? Last edited by blink18247; 09-11-2008 at 10:21 AM. Reason: Automerged Doublepost | ||||||
|
| |
| |
|
09-11-2008, 07:17 PM
| #6 (permalink) | ||||||
| Senior Member
Join Date: Jun 2008 Location: NC
Posts: 1,395
Tournaments Joined: 0 Tournament Wins: 0 Gave Thanks: 51
Received Thanks: 153
Nominated 0 Times in 0 Posts TOTM Award(s): 0 | Re: parts i'll need You cant use anything except a torx screwdriver for torx screws, if you dont have one just go to walmart or your local hardware store, you should be able to find a kit for around $10-15 | ||||||
|
| |
| |
|
09-11-2008, 08:17 PM
| #7 (permalink) | ||||||
| 7S Enthusiast
Join Date: Sep 2008
Posts: 80
Tournaments Joined: 0 Tournament Wins: 0 Gave Thanks: 8
Received Thanks: 5
Nominated 0 Times in 0 Posts TOTM Award(s): 0 | Re: parts i'll need ahh nvm my dad already has one xD thank god for guys who did things like heating and air when they were younger O_O and now my dad is a computer/electronics god O_O Last edited by blink18247; 09-11-2008 at 08:18 PM. | ||||||
|
| |
| |
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Dip Dying Plastic Parts | Reverend Murder | Hardware Customizations | 32 | 11-09-2008 06:32 PM |
Linear Mode
